Match of Valspar™ V003-2 Flower Power *

A match of Valspar V003-2 Flower Power can be ordered as MyPerfectColor custom spray paint for plastic parts, but plastics vary a lot. Because some plastics are harder to bond to than others, the safest approach is to test on the actual item before committing to the full project.

If the plastic is slick or low-energy, use the MyPerfectColor primer for Acrylic Enamel to improve adhesion. That is especially helpful when the part is a trim piece, cover, or housing that needs better bite from the coating.

Coverage for V003-2 Flower Power depends on the size of the surface, how smooth or textured it is, the hiding power needed, the spray method, and how many coats you plan to apply.

A typical can of spray paint covers about 20 square feet with one coat. For larger areas, other MyPerfectColor paint formats typically cover about 400 to 600 square feet. If the surface is rough, dark, or uneven, plan for more material so you do not run short.

Yes. V003-2 Flower Power in MyPerfectColor custom spray paint is practical for small parts and hardware such as switch covers, knobs, vents, speaker grilles, brackets, and trim pieces when you want a smooth sprayed finish.

This format works best on removable or easy-to-mask parts that can be cleaned and lightly prepped first. If the item stays installed, mask surrounding surfaces carefully so overspray does not affect nearby areas.

Before spraying V003-2 Flower Power on metal or over an existing coating, clean off dust, grease, wax, and other contamination. Scuff glossy surfaces so the new coating can grip, and remove rust or any peeling, chalky, or failing paint before you start.

If the old coating is stable, the final look can still change because gloss, texture, and surface condition affect how the color reads. A test on a hidden area is the safest way to check both adhesion and appearance before coating the full part.

Use light, even coats and keep the can moving so V003-2 Flower Power builds up gradually. Slight overlap between passes helps reduce striping, runs, and heavy spots that can make the finish look uneven.

Let each coat flash or dry according to the label before applying the next coat. Thin coats usually give a cleaner result than one heavy pass, especially on edges, small parts, and other surfaces where wet paint can build up quickly.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar V003-2 Flower Power enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar V003-2 Flower Power you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar V003-2 Flower Power in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.