70% of Orders Ship within 3 Business Days.
Match of Valspar™ T614 In The Deep End *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of Valspar T614 In The Deep End reads as a muted blue-green with a cool lean, soft gray cast, and moderate depth. It is subdued rather than bright, so the color tends to look quieter and less saturated than a clearer teal.
MyPerfectColor custom spray paint matched to this selected brand color can be used on vents, switch plates, speaker grilles, mailboxes, railings, brackets, shelf supports, PVC, shutters, hardware, and small fixture parts where a controlled blue-green finish is needed. It also works for baskets, frames, and other removable pieces that spray evenly once properly cleaned and primed.
Because the color is relatively low-chroma, it often covers more evenly than stronger accent colors, but finish and substrate still matter. A smooth surface and consistent film build will help the blue-green undertone read cleanly, while rough texture, gloss differences, or uneven prep can change how much gray is visible.
On exterior parts, the color may hold its appearance better than a vivid hue, but sunlight, weathering, and sheen changes can still alter depth over time. If the part will be handled often or sprayed over an existing finish, proper surface preparation remains important for a uniform result.
Similar colors:
Product Data
About Valspar Paint
The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.
Matching Valspar Paint Colors
MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar T614 In The Deep End by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.
The colors shown on this website are computer video simulations of the Valspar T614 In The Deep End and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar T614 In The Deep End. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of Valspar™ T614 In The Deep End *
Can I use MyPerfectColor spray paint matched to Valspar T614 In The Deep End on plastic parts?
Yes, but plastics vary a lot, so test the finished coating on the actual part before you commit to the full project. MyPerfectColor spray paint matched to Valspar T614 In The Deep End is made for color matching, but surface behavior depends on the specific plastic. For better adhesion, use the MyPerfectColor primer for Acrylic Enamel, especially on difficult or low-energy plastics.
What should I confirm before ordering a custom match of Valspar T614 In The Deep End from MyPerfectColor?
Confirm the brand color reference, the MyPerfectColor product type, the sheen, and the quantity before you place the order. A match of Valspar T614 In The Deep End is a color reference, not the full paint specification, so the code alone does not tell you the finish or the exact product format you need. Custom-made color matches are not returnable or refundable, so it is important to verify the order details first.
How long does MyPerfectColor spray paint matched to Valspar T614 In The Deep End take to dry and recoat?
Under normal spray application conditions, MyPerfectColor spray paint matched to Valspar T614 In The Deep End is dry to the touch within minutes. Plan to recoat in about one to two hours, and allow about two weeks for full cure before putting the part into hard use or handling it aggressively. Dry to touch, recoating, and full cure are different milestones, so do not treat them as the same step.
Where can I find the SDS for MyPerfectColor paint matched to Valspar T614 In The Deep End?
The SDS is tied to the MyPerfectColor product or chemistry, not the Valspar T614 In The Deep End color name alone. Check the MyPerfectColor Safety Data Sheets page for the correct document for the product you are ordering. If you are choosing between formats, make sure you look up the SDS for the exact MyPerfectColor paint type, not just the color reference.
What prep is needed for metal or an existing coating before using a match of Valspar T614 In The Deep End?
Clean the surface first, then remove rust, loose coating, oil, dust, or other contamination before spraying. If the existing coating is glossy or slick, scuffing can help the new finish grab better. The condition of the old coating, plus its gloss and texture, can change how Valspar T614 In The Deep End reads after it is applied, so testing on a small area is a practical way to reduce risk.
How quickly will I receive my paint matched to Valspar T614 In The Deep End?
What are the LRV, HEX, and RGB values for the Valspar T614 In The Deep End?
What paint type is used to make spray paint matched to Valspar T614 In The Deep End? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar T614 In The Deep End enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
What is the Hue Angle and Chroma for Valspar T614 In The Deep End?
Does Valspar paint color Valspar T614 In The Deep End need primer?
How can MyPerfectColor color match the Valspar T614 In The Deep End in paint?
MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar T614 In The Deep End you are looking for is in our library. We are able to make paint and verify that it matches the original.
Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.
How do I convert Valspar T614 In The Deep End to a different color from another paint company?
While we can provide Valspar T614 In The Deep End in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.