Match of Valspar™ 13-1C Queen Anne *

Confirm 13-1C Queen Anne from a physical swatch or a known existing color reference, not from a screen alone. MyPerfectColor makes a custom-matched paint to the selected Valspar color reference, so the color target needs to be correct before you place the order.

The code and name identify the color target only. They do not define sheen, product line, or how an existing painted surface has aged, so checking the reference first helps avoid ordering the wrong match.

Choose the finish based on how the item will be used, cleaned, and viewed. With 13-1C Queen Anne, sheen affects durability, reflectivity, cleanup, and how the matched color reads on the finished surface.

Lower-sheen finishes usually hide surface flaws better, while higher-sheen finishes are easier to wipe clean but can make texture and application marks more visible. If you are matching a part that will sit next to an existing surface, the finish choice matters as much as the color match itself.

Coverage for 13-1C Queen Anne depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover about 400 to 600 square feet, but actual coverage can be lower on rough or porous surfaces.

If the substrate is dark, uneven, or highly textured, plan for extra material. For a project where consistent color matters, it is better to have enough paint for the full job than to run short between coats.

Primer may or may not be needed for 13-1C Queen Anne, depending on the substrate, its condition, and the paint type you choose. A primer never hurts and can only improve adhesion, but it is not always required.

If the surface is bare, repaired, glossy, stained, or difficult to bond to, primer becomes more important. Check the prep guidance for the specific MyPerfectColor product you are ordering so you match the color and the surface prep to the job.

Yes, but plastics vary widely, so a match of 13-1C Queen Anne should be tested on the actual material before you commit to the full project. MyPerfectColor spray paint sticks well to most plastics, but prep and adhesion can still change by plastic type.

For better adhesion, use the MyPerfectColor primer for acrylic enamel when appropriate and follow the surface prep steps for the specific item. This is especially important for low-energy plastics, molded parts, and any piece that will be handled often.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 13-1C Queen Anne enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 13-1C Queen Anne you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 13-1C Queen Anne in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.