Pantone™ PMS 2116 C

When using PMS 2116 C in pop-ups or retail environments, evaluate both lighting and surface preparation before committing to large-scale application. Test the color with a physical Pantone reference and a sample of the actual paint in the intended lighting and finish. PMS 2116 C is a low LRV, highly saturated blue-violet that can look different depending on lighting and gloss, so sampling is important. For best durability and visual consistency, confirm the coating system suits your display needs, especially in high-traffic or temporary installations where impact resistance may matter.

When painting metal or powder-coated parts with PMS 2116 C, surface preparation is critical for both adhesion and final color appearance. Scuff and clean all surfaces thoroughly to remove gloss, dust, or any contaminants before application. Note that existing coatings or gloss levels will affect how PMS 2116 C appears after painting. It is recommended to create a sample on your specific substrate to evaluate coverage, color, and finish before full production.

Yes, matching PMS 2116 C exactly can be challenging, especially across different materials or finishes. The high saturation and deep blue-violet of PMS 2116 C are sensitive to substrate, gloss, and lighting. MyPerfectColor uses processes designed for accuracy, but some variation is always possible. For critical branding projects, review a painted sample in the intended lighting and finish before approving large orders. This ensures your result aligns closely with the Pantone PMS target.

To keep PMS 2116 C uniform on large areas, use consistent application techniques and plan coats carefully. This color''s saturation means it may require multiple coats for full, even coverage without streaks or patchiness. Always mix materials well before use, maintain a wet edge, and work in controlled lighting where color shifts are visible. It is best to sample in advance, so you can confirm the final appearance across your display or installation.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 2116 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 2116 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.