70% of Orders Ship within 3 Business Days.
Match of US Government™ Fed Std 595C 16250 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of US Government Fed Std 595C 16250 is a muted blue-gray with a cool cast and very low saturation. It reads as a restrained neutral rather than a clear blue, with medium-dark depth and a slight green bias that can become more noticeable depending on light and finish.
MyPerfectColor custom-matched paint in this color can be used on equipment panels, brackets, enclosures, housings, vents, switch covers, rack parts, support hardware, and fabricated components where a government-standard reference needs to be carried across metal, plastic, or composite parts. It is also a practical choice for touch-up on carts, cabinets, fixtures, and prototype or training pieces that need to stay aligned with the specified Fed Std 595C target.
Because this is a low-chroma neutral, it usually behaves more predictably than a vivid color, but finish, texture, and substrate still affect the result. Sheen changes can make the color read lighter or darker, and repairs next to older coatings may show differences from wear, fading, or gloss shift even when the code match is correct. On dark or uneven substrates, coverage planning may still matter for a clean, even result.
Fed Std 595C and AMS-STD-595 are color references, not complete coating systems, so the code alone does not define chemistry, gloss, prep, or acceptance criteria. For inspection-sensitive or adjacency-sensitive work, the matched color should be evaluated against the specific part, aging condition, and project requirements rather than only the standard chip.
Similar colors:
Product Data
Perfect Color Ventures LLC DUNS Number and CAGE Code
MyPerfectColor DUNS Number: 117438928
MyPerfectColor CAGE Code: 8SUA4
MyPerfectColor is compliant with section 889. Download the Record of Section 889 Representations PERFECT COLOR VENTURES LLC.
About US Government Federal Standard (now Aerospace Material Specification / AMS) 595 Colors. Fed-Std-595C / FED STD 595 Colors
The Federal Standard (now Aerospace Material Specification / AMS) 595 colors are used to specify colors for US Government applications. The color are used by the US Government agencies, branches and suppliers. The most common requests we receive for Fed Standard Colors are for spray paint, Direct to Metal and other paints for prototyping, marking and identification and touchup applications. Typical clients include the USCG, all branches of the Armed Services, the State Department, Lockheed Martin and Boeing. For example, we provided paint to the Navy for marking shells with the specific Fed Std color designated to identify the type of round.
We offer 5 standard sheens in our lacquer touchup paint: flat, low lustre, satin, semi-gloss or gloss. We also offer a full range of Alkyd and Acrylic Direct To Metal paints. Please contact us if you have any questions. Please submit RFQs to [email protected]
The colors in the Federal Standard set have no official names and are identified by five-digits. The numbers designate the sheen, color classification and color intensity.
The first digit will be 1,2 or 3 and indicates the level of sheen:
1 = gloss
2 = semi gloss
3 = matt
The second digit indicates the color group;
0 = Brown 5 = Blue
1 = Red 6 = Grey
2 = Orange 7 = Other (white, black, violet, metallic)
3 = Yellow 8 = Fluorescent
4 = Green
The third to fifth digits indicate the intensity. Lower numbers indicates a darker color and higher numbers indicate a lighter color.
While the Fed Std colors indicate sheen as part of the 5 digits, MyPerfectColor still requires you to enter a specific sheen. For example, the color Fed Std 37038 technically refers to a matte finish, but MyPerfectColor offers it in any sheen.
Frequently Asked Questions About Match of US Government™ Fed Std 595C 16250 *
What does Fed Std 595C 16250 mean when I order MyPerfectColor paint?
A match of US Government Fed Std 595C 16250 is a government color reference target. It tells you which color to match, but it does not by itself define the coating chemistry, gloss level, surface prep, corrosion protection, or approval status.
When you order from MyPerfectColor, you are selecting paint matched to Fed Std 595C 16250, not an official government-issued coating system. If your project has a separate specification for primer, finish, or acceptance, those requirements still need to be handled separately.
Can Fed Std 595C 16250 be used for touch-up on an older painted part, or do I need a different match?
A match of US Government Fed Std 595C 16250 is the right reference when the goal is to match the standard color, but an older in-service coating can still look different because of fade, weathering, sheen change, texture, or prior repainting.
If you are touching up a visible area next to an aged coating, a standard-code match may not blend as well as a match to the existing part or a full-part repaint. For acceptance-sensitive work, it is usually better to test the match on the actual surface before committing to the full repair.
Will the finish affect how Fed Std 595C 16250 looks after application?
Yes. Fed Std 595C 16250 defines the color reference, but gloss, matte, satin, texture, and film build can all change how the finished part appears.
MyPerfectColor can supply a match to Fed Std 595C 16250 in different product formats, but the final visual result depends on the product you choose and how it is applied. If you need the closest possible visual result, match the finish requirement and not just the color code.
What prep should I do before applying Fed Std 595C 16250 to metal or over an existing coating?
For Fed Std 595C 16250, start with a clean surface. Remove dirt, oil, grease, and loose material, then scuff the surface if the existing coating is sound enough to paint over.
For bare metal, corrosion, oxidation, and substrate condition matter, so primer selection may be needed before applying the color coat. For existing coatings or mixed substrates, test a small area first to confirm adhesion and appearance on the actual part.
How should I plan dry time and recoating for Fed Std 595C 16250?
With Fed Std 595C 16250, dry-to-touch, recoat time, and full cure are different stages. The correct timing depends on the specific MyPerfectColor product format you choose, such as spray paint or touch-up paint.
Use the product instructions for the exact dry and recoat windows before handling the part or applying another coat. If the part will be assembled, shipped, or put back into service quickly, plan around the full cure time, not just the dry-to-touch stage.
When will I receive my paint matching US Government Fed Std 595C 16250? Can I get it right away?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match US Government Fed Std 595C 16250 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the US Government Fed Std 595C 16250?
The RGB values for US Government Fed Std 595C 16250 are 0, 0, 0 and the HEX code is #000000. The LRV for US Government Fed Std 595C 16250 is 0.01. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to US Government Fed Std 595C 16250? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to US Government Fed Std 595C 16250 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
Does US Government paint color US Government Fed Std 595C 16250 need primer?
MyPerfectColor doesn't sell US Government paint, but it does match the US Government Fed Std 595C 16250 and all the other US Government colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How do I buy paint in the US Government Fed Std 595C 16250?
Many types of paint are available for US Government Fed Std 595C 16250 with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to US Government Fed Std 595C 16250?
The US Government Fed Std 595C 16250 is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
How do I get a Certificate of Conformance (CofC) for the US Government Fed Std 595C 16250?
Contact MyPerfectColor support if you need a certificate of conformance for US Government Fed Std 595C 16250. We are happy to provide this with your order.
Does this US Government Fed Std 595C 16250 meet my spec?
The US Government Fed Std 595C 16250 is the color portion of the spec. The remaining part of the spec will indicate the type of paint needed. Paint can be purchased directly from the color page, but MyPerfectColor offers many additional paint types not visible from the color page. Please contact us if you are not sure what you need, you don't see what you are looking for, or you need a quote to proceed. MyPerfectColor can furnish Certificates of Conformance upon request.
Color details
RGB 0, 0, 0
HEX: #000000
LRV: 0.01%
Color properties
Color Type:
Standard
Hide:
Standard
Match Source:
Brochure/swatch book
Match Type:
Physical match
Textured:
No
Source on hand:
Yes
Color Category:
Standard
