Match of Behr™ PPU13-14 Ozone *

Yes, but the surface condition matters. Clean the metal, remove grease and contamination, and scuff any glossy or slick existing coating before applying a match of Behr PPU13-14 Ozone. If you see rust, peeling paint, or weak old coating, address that first so the new finish can bond properly.

The final appearance can change with gloss, texture, and the condition of the old coating under it. If the part is a railing, mailbox, bracket, vent, or other fixture, test the match on the actual surface before painting the full item.

Plastics vary a lot, so test the actual material before committing to the full project. MyPerfectColor spray paint is made to stick well to most plastics, but prep still matters, especially on slick or low-energy surfaces.

For better adhesion, use the MyPerfectColor primer intended for this type of coating and follow the prep steps for the specific plastic or part. This is especially useful for PVC pipe, vents, grilles, covers, and other molded pieces where surface behavior can differ from one item to another.

Choose the finish based on how the part will be used, because the same color can look different in different sheens. A higher gloss finish usually reflects more light and is easier to wipe clean, while a lower sheen can reduce reflections and may be a better fit when the surface itself is not perfectly smooth.

If you are coating an existing item, try to match the current sheen as closely as possible so the new coating reads as one finish. For a new part, pick the finish that best fits the application, not just the color name Behr PPU13-14 Ozone.

Confirm the color reference, the MyPerfectColor product format, the sheen, and the quantity before you order. MyPerfectColor is making its own paint matched to Behr PPU13-14 Ozone, so it is important to verify the exact reference you want rather than assuming the result will behave like the original brand paint in every situation.

Custom-made color matches are not returnable or refundable, so double-check the details if the paint is going on a visible part, a repair, or a repeatable project. This matters most when you need consistency across multiple pieces or when the item cannot easily be repainted.

Coverage depends on the size of the part, the texture of the surface, the hiding power needed, the application method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover between 400 and 600 square feet.

For projects like pipes, vents, hardware, shutters, or other small parts, estimate the total surface area and add coverage for the number of coats you expect to need. If the surface is rough, porous, or a darker color underneath, plan for less coverage per container.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr PPU13-14 Ozone enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr PPU13-14 Ozone in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr PPU13-14 Ozone in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.