Match of Behr™ UL220-7 Ozone *

For MyPerfectColor paint matched to Behr UL220-7 Ozone, the finish you choose changes both the look and the practical performance of the coating. Lower-gloss finishes usually hide surface flaws better, while higher-gloss finishes reflect more light and are often easier to clean. If the part will be handled often or needs more wipeability, choose a finish that fits that use rather than selecting by color name alone.

Behr UL220-7 Ozone identifies the color reference, but it does not determine sheen, product line, or the surface prep needed for your item. If you are coating trim, hardware, vents, or another small part, pick the finish based on the object and the expected wear, not just on the color match.

Confirm Behr UL220-7 Ozone from a physical swatch, paint chip, label, or an existing painted sample whenever possible. Do not rely on a computer screen alone, because screens can shift the color and make the reference look different from the actual target.

MyPerfectColor makes a custom-matched paint to the selected Behr color reference, so the important step is verifying that UL220-7 Ozone is the exact color you want matched before you place the order. This helps avoid ordering a match to the wrong brand color or the wrong shade within the brand.

The SDS is tied to the MyPerfectColor product and chemistry, not to the Behr UL220-7 Ozone color name by itself. If you need safety information for the paint you are ordering, check the SDS for the specific MyPerfectColor product format you plan to use.

MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

For MyPerfectColor spray paint matched to Behr UL220-7 Ozone, dry-to-touch time is usually within minutes, recoating is typically done in one to two hours, and full cure is about two weeks. Those are different stages, so a surface can feel dry before it is ready for full handling or reinstallation.

If you are coating a part that will be installed, stacked, or reused quickly, plan around the full cure time when possible. Waiting longer reduces the chance of marking or damaging the fresh coating.

Primer depends on the substrate, the condition of the surface, and the paint format you are using. A primer never hurts and can only improve adhesion, but it is not always required for every project.

For MyPerfectColor paint matched to Behr UL220-7 Ozone, check the prep guidance for the selected product and consider primer if the surface is glossy, porous, uneven, or a difficult material. If you are unsure, testing the prep on a small area is the safest way to reduce ordering and application risk.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr UL220-7 Ozone enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr UL220-7 Ozone in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr UL220-7 Ozone in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.