Match of Behr™ PPU10-12 Whitened Sage *

For a match of Behr PPU10-12 Whitened Sage, plan from the actual area you need to coat, not just the color name. Coverage changes with surface size, texture, hiding power, application method, and how many coats you need. As a rough planning guide, one can of MyPerfectColor spray paint typically covers about 20 square feet with one coat. If you need a gallon format, typical coverage for other paints is about 400 to 600 square feet, but the real number still depends on the surface and prep.

If you are coating trim, vents, pipe, hardware, or a small fixture in Behr PPU10-12 Whitened Sage, buy enough for the whole part and allow for extra coats where the base color shows through.

When you spray a match of Behr PPU10-12 Whitened Sage, use light, even coats rather than one heavy pass. Hold the can at a steady distance, keep it moving, and overlap each pass slightly so the color builds evenly. Heavy passes can cause runs, uneven sheen, or a muddy look.

Let each coat dry or flash according to the product label before adding the next coat. If the part is small, such as a vent, cover plate, grille, bracket, or pipe, spray from different angles only as needed to reach edges without flooding the surface.

Even after you order a match of Behr PPU10-12 Whitened Sage, the finished item can still look different depending on lighting, placement, sheen, and nearby surfaces. The same color can read lighter, darker, warmer, or cooler once it is on a vertical part, a curved item, or a surface next to other materials.

If the piece will sit beside an existing painted surface or under unusual light, expect some visual change from the reference, even when the color match itself is correct.

Yes, MyPerfectColor spray paint matched to Behr PPU10-12 Whitened Sage can be used on many plastic parts, but plastics vary a lot. Test the actual material first if the part is important, because some plastics need different prep or a primer to hold the coating well.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer for Acrylic Enamel can improve adhesion when the substrate is difficult or low energy. That is especially helpful on parts like panels, covers, trim pieces, and other molded items.

Choose the sheen for your match of Behr PPU10-12 Whitened Sage based on how the part will be used and how much reflectivity you want. Glossier finishes are usually easier to wipe clean and often feel more durable, but they also reflect more light and can make the color look different than a lower-sheen finish.

If you are matching a visible part, pick the sheen that fits the application before you order, because gloss level can change the way Behr PPU10-12 Whitened Sage reads on the finished item.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr PPU10-12 Whitened Sage enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr PPU10-12 Whitened Sage in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr PPU10-12 Whitened Sage in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.