Pantone™ PMS Warm Gray 4 C

PMS Warm Gray 4 C is a mid-value warm gray, so it generally offers moderate coverage compared to very bright or highly saturated Pantone colors. However, the number of coats required depends on several factors, including the substrate color, primer used, and selected paint type or sheen. For best results and a uniform, brand-consistent appearance, plan for at least two coats, especially if applying over a contrasting primer or existing color. Testing coverage on a sample piece is recommended for final installation work.

When applying PMS Warm Gray 4 C on metal or powder-coated surfaces, proper surface preparation is important to achieve brand-consistent results. Clean and scuff existing coatings to promote adhesion, and be aware that the original gloss or color of the substrate may affect the visual outcome. Variations in sheen or surface texture can change how PMS Warm Gray 4 C appears in your display or installation. Testing on an actual sample is the best way to confirm results before moving to full production.

Ordering paint matched to PMS Warm Gray 4 C means you are purchasing a coating produced to visually match the standardized Pantone color reference. The PMS code specifies a visual target, not a specific formula, material, or gloss level. The actual result can vary depending on the paint chemistry, finish, and surface used. For brand-facing or display applications, always assess if the paint finish, substrate, and lighting meet your needs before installation.

To order PMS Warm Gray 4 C, select your preferred paint type, sheen, and quantity on the product page. Make sure to review the application requirements for your project, such as compatibility with the surface and the visual effect of the chosen finish. If you need a sample for approval or are working with unfamiliar materials, it is advisable to start with a small quantity. This ensures the product meets your expectations for brand and project needs.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS Warm Gray 4 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS Warm Gray 4 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.