Pantone™ PMS 9043 C

Pantone books serve as reference standards for PMS 9043 C but the paint version may appear different depending on finish and the material to which it is applied. Paint on an actual project can vary due to sheen, substrate texture, and application method. It is recommended to test PMS 9043 C paint on your target material and review the appearance under your expected lighting conditions before committing to full production.

The finish you select for PMS 9043 C affects both visual impact and practical performance. Gloss finishes offer more punch and higher color saturation but may show glare or reflections under direct light. Matte finishes reduce glare and are often preferred for close viewing or complex surfaces, but they may appear less vibrant. Your decision should take into account lighting, the typical viewing distance, and the brand requirements for PMS 9043 C. Sampling both finishes on your intended material is encouraged to confirm your choice.

Yes, suffixes such as the 'C' in PMS 9043 C identify specific variants within the Pantone Matching System, often based on material or intended context. It is important to confirm the exact code referenced by your brand standards or project documentation before ordering paint to ensure you match the correct version of PMS 9043 C. Ordering by an incomplete or incorrect code may result in a mismatch with the intended brand standard.

When painting metal or powder-coated surfaces with PMS 9043 C, surface preparation is critical. Parts should be thoroughly cleaned and lightly scuffed to help the new paint adhere. Any previous coatings or varying surface gloss may affect the final appearance and color of PMS 9043 C. It is recommended to test on a sample part before moving forward with production to confirm both adhesion and visual consistency with the PMS 9043 C standard.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 9043 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 9043 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.