Pantone™ PMS 4725 C

When using PMS 4725 C in prototypes or concept models, select a paint format that matches your prototype material and desired application method, such as spray paint for larger surfaces or paint pens for detail. Evaluate PMS 4725 C on the actual prototype substrate to confirm visual alignment with brand standards. Be aware that finish and lighting can influence the perceived warmth and subtlety of PMS 4725 C. Plan to review your prototype under the lighting conditions expected in the final display environment for the most accurate assessment.

To maintain a consistent look with PMS 4725 C on large surfaces, use the same application method (such as spraying or rolling) across the entire area. Apply each coat in even, overlapping passes, and avoid starting or stopping midway through a panel. Make sure the product is thoroughly mixed before use. Allow each coat to dry fully before recoating, and plan for enough coverage, especially in areas where material color or surface absorption may cause lighter or darker spots. If possible, paint all pieces at the same time for best uniformity.

PMS 4725 C can appear different when applied to metals, plastics, wood, or other materials because of differences in absorption, surface texture, and reflectivity. Gloss finishes may make PMS 4725 C look lighter, while matte finishes can mute its warmth. For decision-making, apply test samples of PMS 4725 C to each material type in your project and review them under actual project lighting. This approach helps ensure the color aligns visually with your brand intent across all components.

For best results with PMS 4725 C, clean all surfaces to remove dust, grease, or oils before painting. Lightly scuff glossy or smooth surfaces to improve paint adhesion, then wipe away loose particles. If possible, conduct a small test application of PMS 4725 C to check for proper adhesion and coverage. Following these steps improves final color consistency and reduces the risk of visible defects in branding or display projects.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 4725 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 4725 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.