Pantone™ PMS 456 C

When evaluating PMS 456 C samples, it is important to compare them under consistent and appropriate lighting, ideally in the environment where the final application will be seen. Make sure all samples are applied to the same type of substrate with the same finish, as substrate differences can change color appearance. Allow all coatings to fully dry or cure before making a final assessment, as color and finish can shift as the paint sets. Consistency in these comparison practices helps avoid approval errors and supports brand color accuracy.

Whether you need a primer for PMS 456 C depends on the type of paint, substrate material, and project requirements. Primers are generally needed for bare substrates such as metal, plastic, or wood to ensure adhesion and even color appearance. They may also be recommended if a strong color change is required or if the surface is porous. Always follow substrate and product-specific guidance, and consult paint system instructions for best results with PMS 456 C.

When specifying PMS 456 C for pop-ups or retail environments, consider the durability of the paint, the lighting where the color will be viewed, and whether a sample can be tested on your actual substrate. High-traffic or hands-on environments may require more durable finishes, while lighting conditions can shift the visual perception of PMS 456 C. Testing a sample before committing to a full installation helps confirm that the appearance is consistent with brand expectations under real site conditions.

For the best results when using spray paint matched to PMS 456 C, apply multiple thin coats rather than one heavy coat. Allow each coat to become dry to the touch before applying the next. This method reduces runs and helps achieve even coverage, especially since PMS 456 C may need extra attention for uniformity due to its muted and mid-range character. Proper application habits work together with color matching to produce a consistent, brand-correct look.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 456 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 456 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.