Pantone™ PMS 410 C

PMS 410 C is a muted, low-saturation taupe, so its coverage is typically better than that of highly saturated Pantone colors. However, visible hide and uniformity can still be influenced by the substrate and the finish you select. Applying PMS 410 C over a contrasting or porous surface, or using a very matte finish, may require extra coats for consistent coverage. To achieve the target PMS 410 C appearance, always sample on your intended substrate with the chosen finish and check results under your actual lighting.

The SDS for PMS 410 C paint is based on the specific product type and not the Pantone color code. To access the correct Safety Data Sheet, select the product format you are considering (such as spray paint, paint pen, or brush-in-cap) and visit the SDS library for that product. If you need help locating the right SDS, contact customer support for guidance.

Whether you need a primer with PMS 410 C paint depends on your substrate, the paint type you choose, and the project's requirements. A primer is recommended for surfaces that are new, bare, glossy, or have been repaired, as well as when transitioning between very different colors. Using a primer can improve adhesion and coverage, especially for uniform brand appearance. Review product-specific primer guidance, or consult with customer support if uncertain.

There is no widely recognized brand or institutional association specifically documented for PMS 410 C. This muted, earthy taupe is chosen primarily for projects that require understated, professional color in branding, display fabrication, and industrial design settings. If you have specific brand standards to meet, always verify with your brand guideline whether PMS 410 C is an approved color reference.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 410 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 410 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.