Pantone™ PMS 3305 C

Before ordering paint matched to PMS 3305 C, always check your brand standards or project documentation for the exact Pantone code, including any suffixes like 'C', 'U', or 'M'. These suffixes indicate the intended reference for coated, uncoated, or matte finishes and can affect color appearance and acceptance decisions. Using the wrong reference may result in a color that does not meet your visual target for branded displays or components.

A typical spray can of PMS 3305 C paint will cover about 20 to 25 square feet per coat on a smooth, primed surface. Actual coverage will vary based on how the paint is applied, the surface texture, and the number of coats required for full hide. Since PMS 3305 C is a deep, saturated green, more than one coat is often needed, especially on light or uneven substrates. For best results, estimate your total square footage and plan for sufficient cans to achieve uniform coverage with multiple coats if needed.

Ordering PMS 3305 C paint means you are selecting a product matched to the visual target defined by Pantone for that code. The Pantone PMS system is a color communication standard, not a coating formula or finish specification. This paint is produced to visually match the PMS 3305 C reference as closely as possible for branding and display use. It is not a Pantone-approved manufacturing process or ink and may look different across substrates, finishes, or lighting. Always evaluate a sample if precise appearance is critical.

For the best results with PMS 3305 C spray paint, apply several light, even coats rather than a single heavy coat. Allow proper drying or flash time between coats, following the instructions on the can. This approach helps achieve better coverage, depth, and color consistency, while also reducing the risk of drips and uneven texture. Adjust your technique based on surface type and environmental conditions.

Unfortunately, no.

Some manufacturers specify Pantone colors as touch up for their products, but Pantone does not work well as a proxy for a touch-up solution (for a litany of reasons such as it doesn't include sheen and Pantone color tolerances are not tight enough for touch up). When we match Pantone colors we are matching to a swatch in a Pantone book - not to your product.

The only way we can provide a touch-up solution for your product is for you send us a part. We would use the part to create a touch-up grade match. Unfortunately, there isn't an effective way to 'spec' the color well enough to produce a touch up without the part.

Read more about using Pantone for touch-up.

Learn more about our paint color matching service.

To make spray paint matched to Pantone PMS 3305 C. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide PMS 3305 C in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, especially for a color collection like Pantone which is designed for bright colors and inks.