Match of Benjamin Moore™ CSP-215 cake batter *

Choose the finish based on how the item will be used and how much reflectivity you want. A glossier finish is usually easier to clean and more durable, but it will reflect more light and can make CSP-215 cake batter read a little different on the finished item. A flatter finish hides surface flaws better, but it is usually less reflective and may be less practical on high-wear parts.

If you are coating a part that will sit near other painted surfaces, try to keep the sheen consistent with the surrounding finish. MyPerfectColor is supplying a custom-matched paint made to match CSP-215 cake batter, so the sheen you choose is a separate ordering decision from the color match itself.

Primer depends on the substrate, its condition, and the product you are using. Bare, porous, glossy, repaired, or hard-to-bond surfaces often benefit from primer, and primer can improve adhesion even when it is not strictly required. As a rule of thumb, a primer never hurts and can only improve adhesion, but it is not always necessary.

For plastics and other difficult surfaces, test on the actual material whenever possible. If the item is a challenging substrate, using the MyPerfectColor primer can help improve adhesion before applying a match of CSP-215 cake batter.

Not always. A match of Benjamin Moore CSP-215 cake batter can read differently once it is applied because lighting, sheen, surrounding surfaces, texture, and viewing angle all affect appearance. A color match that looks right on a swatch can still seem a little different on the finished item if the lighting is warm, cool, bright, or uneven.

If you are coating a part that will sit next to an existing painted surface, the new finish can also look different from an older surface because aging, wear, and gloss changes alter what your eye sees. For the most reliable result, judge the finished coating in the same lighting where the item will live.

Yes, but plastics vary a lot, so prep matters. MyPerfectColor spray paint sticks well to most plastics, but low-energy or slick plastics may need different preparation or a primer to get reliable adhesion. Testing on the actual plastic is the safest way to reduce surprises.

For best results, clean the surface, remove any release agents, and lightly scuff if the plastic allows it. Using the MyPerfectColor primer before a match of CSP-215 cake batter can help improve adhesion on difficult plastics and other challenging substrates.

Coverage depends on the size of the item, the surface texture, how much hiding is needed, the application method, and how many coats you plan to apply. For MyPerfectColor spray paint, a typical can covers about 20 square feet with one coat.

If you are coating a rough, porous, dark, or uneven surface, plan for more material because extra coats may be needed to get even coverage in CSP-215 cake batter. If you are unsure, it is safer to order a little extra than to run short before the project is finished.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore CSP-215 cake batter enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore CSP-215 cake batter in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.