Match of Benjamin Moore™ 953 Feather Down *

Confirm 953 Feather Down from a physical swatch from the original Benjamin Moore color or from a known existing painted reference, not from a screen alone. MyPerfectColor matches to the original brand color standard, so the goal is to verify that 953 Feather Down is the target color before placing the order.

If the item you are matching was already painted, compare it to the original reference under consistent light and make sure you are matching the correct Benjamin Moore color code and name.

Not always. A MyPerfectColor match of 953 Feather Down can still read differently depending on lighting, sheen, surface texture, and the colors next to it. Those factors can change how the finished item appears even when the color match itself is correct.

For the best decision, judge 953 Feather Down on the actual part or surface you plan to paint and under the light where it will be used. Matching a full piece is usually more reliable than comparing a small spot beside an older painted surface.

MyPerfectColor spray paint matched to 953 Feather Down is typically dry to touch within minutes, should be recoated in about 1 to 2 hours, and reaches full cure in about two weeks. Dry to touch, recoat time, and full handling readiness are different stages.

If you need to stack, mount, or assemble the part, wait until it is fully cured whenever possible. That reduces the risk of fingerprints, marks, or surface damage on the finished 953 Feather Down coating.

Yes, but plastics vary a lot, so testing on the actual material is important before you paint the full part. A MyPerfectColor spray paint match to 953 Feather Down can stick well to many plastics, but adhesion depends on the specific substrate and preparation.

For better results on difficult or low energy plastic surfaces, use the MyPerfectColor primer and follow the recommended prep steps. If the plastic is unfamiliar, do a small test first to confirm adhesion and coverage before finishing the entire item.

You can find the primer here: https://www.myperfectcolor.com/en/product/995031-Primer-for-Acrylic-Enamel/

The SDS is tied to the MyPerfectColor product and chemistry, not to the 953 Feather Down color name by itself. If you need the Safety Data Sheet, look it up for the specific MyPerfectColor paint format you plan to order.

You can find the SDS information here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 953 Feather Down enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore 953 Feather Down in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.