70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Valspar CI108 Pueblo Dust reads as a warm, muted reddish brown with a dusty rose or clay cast. It has moderate depth and a low-luminance feel, so it comes across as earthy rather than clean or bright. The brown undertone softens the red and keeps the color grounded.
MyPerfectColor custom spray paint matched to CI108 Pueblo Dust can be useful on small parts that need a warm, subdued color reference. It is a practical fit for mailbox bodies, railings, shutter hardware, vent covers, switch plates, speaker grilles, brackets, frames, shelving supports, basket accents, and other sprayable metal, plastic, or previously coated pieces.
Because this is a relatively deep, moderately saturated color, substrate condition and finish can change how it reads. Lighter or uneven surfaces may show through if coverage is thin, while gloss levels can make texture and repair marks more noticeable. On exterior parts, proper prep and enough film build still matter for even color.
Similar colors:
The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.
MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar CI108 Pueblo Dust by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.
The colors shown on this website are computer video simulations of the Valspar CI108 Pueblo Dust and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar CI108 Pueblo Dust. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Coverage depends on the part size, surface texture, how well the coating hides, the spray technique, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, but real-world results vary. If you are painting small parts like covers, knobs, or grilles, one can may be enough for several pieces. For larger items or rough surfaces, plan for more than one can so you do not run short before the final coat is complete.
Spray paint is usually dry to the touch within minutes, but that is not the same as being ready for another coat or full handling. A recoat window of about 1 to 2 hours is a good planning range for MyPerfectColor custom spray paint matched to CI108 Pueblo Dust. Full cure can take about two weeks, so if the part will be handled heavily, assembled, or stacked, give it extra time before putting it into service.
Yes. MyPerfectColor custom spray paint matched to CI108 Pueblo Dust is a practical option for many small parts where a smooth sprayed finish is preferred. It is commonly used for items such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar removable parts. Make sure the part is properly cleaned and prepared first, since prep and substrate condition can affect how the color and finish look after spraying.
Confirm the target color from a physical swatch or a known existing color reference whenever possible. Screen viewing alone can be misleading, and MyPerfectColor matches to the original brand color standard rather than to whatever a monitor shows. If you are trying to match an existing painted item, remember that age, sheen, and surface texture can make the old surface look different from a fresh match of CI108 Pueblo Dust.
The finish you choose changes how CI108 Pueblo Dust looks on the finished item and how the coating performs. Higher-gloss finishes reflect more light and can make surface prep and substrate differences more noticeable, while lower-sheen finishes are less reflective. For projects that need to coordinate with an existing painted part, choose the finish that best matches the surrounding surface. If the item will be cleaned often or handled more, consider how the finish affects durability and maintenance before you order.
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar CI108 Pueblo Dust enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar CI108 Pueblo Dust you are looking for is in our library. We are able to make paint and verify that it matches the original.
Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.
While we can provide Valspar CI108 Pueblo Dust in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.