Match of Valspar™ 10059 Earthy Impressions *

Confirm the target color from a physical Valspar swatch or a known existing color reference before ordering. Screen viewing can shift the color, and MyPerfectColor matches to the original brand color standard for 10059 Earthy Impressions, not to how an aged wall or part may look today.

If you are matching a part that already has wear, fading, or a different sheen, compare against the best original reference you can find so you order the correct MyPerfectColor paint matched to Valspar 10059 Earthy Impressions.

Choose the finish based on how the item will be used and how much reflectivity you want on the finished surface. Lower-gloss finishes usually hide surface marks and texture better, while higher-gloss finishes are easier to clean and reflect more light.

Remember that sheen changes how Valspar 10059 Earthy Impressions reads after application, even when the color match is correct. For parts like vents, hardware, fixtures, or trim pieces, pick the finish that fits the job rather than assuming every finish will look the same.

Apply MyPerfectColor custom spray paint in light, even coats rather than one heavy pass. Keep the can moving, overlap each pass slightly, and hold a consistent distance so the color builds evenly on the surface.

Heavy coats can cause runs, uneven sheen, and a muddy look in Valspar 10059 Earthy Impressions. This matters on small parts like grilles, brackets, fixtures, baskets, or trim pieces, where the surface can show application marks quickly.

Clean the surface first, remove grease or residue, and lightly scuff it if the material or existing finish allows it. Then mask off any areas you do not want painted and test the coating on the actual surface before doing the full item.

Good prep helps the match to Valspar 10059 Earthy Impressions lay down more evenly on metal, plastic, wood, wicker, or previously coated parts. Prep is especially important when the item will be handled often or when the substrate is smooth and hard to anchor.

Coverage depends on the surface size, texture, application method, and how many coats you need. A typical spray can covers about 20 square feet with one coat. Other paint formats typically cover between 400 and 600 square feet, but the actual coverage can vary by surface and film build.

If you are coating a rough surface, a porous substrate, or a dark color underneath, plan for extra material. That is often true for Valspar 10059 Earthy Impressions when the goal is even coverage on parts like pipes, shutters, railings, fixtures, or removable components.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 10059 Earthy Impressions enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 10059 Earthy Impressions you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 10059 Earthy Impressions in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.