Match of Valspar™ 10044A Winter Soft *

Primer depends on the substrate, its condition, and the paint system you are using. Bare, glossy, patched, or hard-to-stick surfaces often benefit from primer, while some already-prepared surfaces may not need it. In general, primer never hurts and can improve adhesion, but it is not always required. Check the prep guidance for the exact product you are ordering and test on the actual surface when possible. If you need primer for this project, MyPerfectColor primer for acrylic enamel is here: https://www.myperfectcolor.com/en/product/995031-Primer-for-Acrylic-Enamel/

Coverage depends on the total surface area, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover between 400 and 600 square feet, depending on the format and surface. If the item is textured, porous, or likely to need extra coats, plan for additional material so you do not run short before the finish is complete.

Yes. MyPerfectColor custom spray paint matched to 10044A Winter Soft by Valspar is a practical option for small parts and hardware where a smooth, durable spray finish is useful. It can be used on items such as switch covers, vents, speaker grilles, knobs, brackets, trim pieces, and similar components. Surface prep matters, so clean the part well and consider primer if the material is slick, previously coated, or otherwise difficult to bond to.

The SDS is tied to the MyPerfectColor product and its chemistry, not the color name alone. For this product family, MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm. Be sure to use the SDS for the exact MyPerfectColor format you are ordering, since the information can differ by product type.

Plastic compatibility depends on the exact plastic, its surface energy, and how well it is prepared. MyPerfectColor spray paint sticks well to most plastics, but testing on the actual part is important because plastics vary widely. For better adhesion on difficult plastics, use the MyPerfectColor primer for acrylic enamel: https://www.myperfectcolor.com/en/product/995031-Primer-for-Acrylic-Enamel/. Clean the surface first and confirm adhesion on a small test area before coating the full part.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 10044A Winter Soft enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 10044A Winter Soft you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 10044A Winter Soft in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.