Match of Martha Stewart™ MSL217 Natural Twine *

Yes, MyPerfectColor custom spray paint matched to MSL217 Natural Twine can be used on many plastic parts, but plastics vary a lot. The exact plastic type, surface texture, and any mold release or contamination can affect adhesion.

For the best chance of success, clean the part well, test on the actual plastic before coating the finished item, and use the MyPerfectColor primer for acrylic enamel when you want better adhesion. A test piece is especially important on PVC, trim parts, housings, and other molded items where the surface can behave differently from one product to another.

The Safety Data Sheet is tied to the MyPerfectColor product and chemistry, not to the color name alone. If you are ordering MSL217 Natural Twine, check the MyPerfectColor Safety Data Sheets page for the exact product format you plan to use.

If you are choosing between spray paint and another MyPerfectColor format, review the SDS for that specific product because the safety information can differ by chemistry.

For metal or an existing coating, start with a clean, dry surface. Remove dirt, oil, rust, and any loose paint or contamination before you spray MyPerfectColor paint matched to MSL217 Natural Twine.

If the old finish is glossy, lightly scuff it so the new coating can grip better. Also check for peeling, oxidation, or unknown coatings, because those conditions can affect adhesion and the final appearance. The gloss and texture of the old surface can also change how MSL217 Natural Twine reads after it is applied.

Choose the sheen based on how the item will be used and how much durability or cleanability you need. Lower sheens usually reduce reflection and can help hide surface texture, while higher sheens are more reflective and can be easier to wipe down.

Keep in mind that sheen changes how MSL217 Natural Twine looks on the finished item. A color match in one sheen may read a little differently in another sheen, so pick the finish that fits the surface and the use case, not just the color name.

MyPerfectColor spray paint matched to MSL217 Natural Twine is typically dry to the touch within minutes. Plan to recoat in about 1 to 2 hours, and allow about 2 weeks for full cure.

Dry to the touch does not mean fully hardened, so avoid heavy handling, stacking, or hard use until the coating has cured. If you are building up coverage on a part, let each coat flash and dry before applying the next one.

MyPerfectColor has an original sample of the Martha Stewart MSL217 Natural Twine in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While MyPerfectColor can provide paint matched to the Martha Stewart MSL217 Natural Twine, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.