Match of Valspar™ 343B-4 Wet Cement *

Yes. MyPerfectColor can make a custom-matched paint for 343B-4 Wet Cement from Valspar. For metal or a previously painted surface, clean off dirt, oil, wax, and loose coating first. If the old finish is glossy and still sound, scuff it so the new coating can bond better. Remove rust, peeling paint, and other contamination before painting. The condition, gloss, and texture of the existing surface can change how the match looks, so a test spray on the actual part is a practical way to check the result before finishing the whole item.

Use light, even coats and let the color build gradually. Keep the can moving, overlap each pass slightly, and hold the can at the distance recommended on the can. Avoid heavy wet passes, which can cause runs, uneven sheen, or a muddy-looking build. Let each coat flash dry before adding the next one. With 343B-4 Wet Cement, spray pattern and film thickness can change the way the matched color reads on the finished item, so slow build-up is usually safer than trying to cover in one coat.

Yes. MyPerfectColor can supply a custom spray paint match of 343B-4 Wet Cement for small parts and hardware such as switch covers, vents, speaker grilles, knobs, brackets, trim pieces, and similar items. This is a practical way to coat removable parts that need a repeatable color reference. Be sure the item is cleaned and prepared for the material it is made from before spraying, since the surface condition affects adhesion and final appearance.

Yes. Finish affects reflectivity, and that changes how 343B-4 Wet Cement is perceived after it is applied. The same color match can read differently in matte, satin, or gloss finishes, and texture can change the way light reflects from the surface. If you need consistent results across multiple parts, keep the finish the same on all of them and test the coating on the actual substrate before committing to the full project.

Coverage depends on the size of the part, the surface texture, the hiding power needed, the application method, and how many coats are required. A typical spray can covers about 20 square feet with one coat. If you are using another MyPerfectColor paint format, coverage is usually higher, with many full-size paints covering about 400 to 600 square feet per gallon. Plan for more paint if the surface is rough, dark, porous, or likely to need multiple coats for even coverage.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 343B-4 Wet Cement enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 343B-4 Wet Cement you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 343B-4 Wet Cement in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.