Match of Valspar™ 219A-2 Tranquil Blue *

Choose the sheen based on the item you are painting and the look you need from the finished surface. A flatter sheen will usually hide minor surface flaws better, while a higher sheen will reflect more light and is often easier to wipe clean. The same match of 219A-2 Tranquil Blue can look a little different as sheen changes, so the finish you order matters as much as the color reference.

If you are matching an existing painted part, try to order the sheen that best fits the original surface. If you are coating a new part or a removable item, pick the sheen that works best for the material and how the item will be used.

For metal or a previously coated surface, clean off dirt, oil, wax, and other contamination before painting MyPerfectColor matched to Valspar 219A-2 Tranquil Blue. Remove rust, peeling paint, and loose material, then scuff sound glossy surfaces so the new coating can grip properly.

Old coating condition matters because gloss, texture, and wear can change how 219A-2 Tranquil Blue looks after it is sprayed or brushed on. If the surface is rusty, peeling, or heavily weathered, address that damage first and test a small area before doing the whole part.

The SDS is tied to the specific MyPerfectColor product and chemistry, not to the Valspar 219A-2 Tranquil Blue color name by itself. If you need the safety information, use the MyPerfectColor Safety Data Sheets page for the product format you are ordering.

MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

Once MyPerfectColor 219A-2 Tranquil Blue is applied, the final appearance can shift with lighting, sheen, nearby colors, and the surface it is on. A match that looks correct in the shop or online can read a little differently in the final location because light and surrounding materials affect perception.

If the item will sit beside an existing painted surface, check the matched finish in the same lighting where it will be used. This is especially important on visible parts where small differences in sheen or placement will stand out.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats the project needs. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats typically cover about 400 to 600 square feet per unit, depending on the product.

If you are painting a rough, porous, dark, or uneven surface, plan for more paint because coverage may be lower and extra coats may be needed. For small parts, fixtures, and spray-painted items, estimate the total area of all pieces before ordering Valspar 219A-2 Tranquil Blue matched paint.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 219A-2 Tranquil Blue enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 219A-2 Tranquil Blue you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar 219A-2 Tranquil Blue in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.