Looking for color by Hex, RGB, CMYK, or Lab?

Match of Valspar™ 316A-2 Willow Branch *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

A match of Valspar 316A-2 Willow Branch is a light beige with a muted yellow-green cast. It sits in a soft, earthy range rather than a clean cream, and the low chroma keeps the color subdued. In spray application, it reads as a pale neutral with a gentle warm-green undertone.

MyPerfectColor custom spray paint matched to this reference is suited to PVC pipe, vent covers, switch plates, speaker grilles, shelf brackets, mailboxes, railings, frames, and cabinet hardware. It can also be useful for maintenance parts, display fixtures, and small accessories where a light, low-contrast color is needed on a separate component.

Because this is a light color, dark or uneven substrates may show through more easily, especially on plastic or metal with patchy prep. The finish and film build can change how warm or green it appears, so consistent coats and surface preparation matter. If you are coating an older part, differences in texture or sheen can be noticeable in this range.

Similar colors:

6004-3B Willow Wind
92-40A Seacrest Green
94-35C Bedford Beige

Product Data

About Valspar Paint

The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.

Matching Valspar Paint Colors

MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar 316A-2 Willow Branch by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.

The colors shown on this website are computer video simulations of the Valspar 316A-2 Willow Branch and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar 316A-2 Willow Branch. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Valspar™ 316A-2 Willow Branch *

For 316A-2 Willow Branch, what surface prep should I do before ordering MyPerfectColor custom spray paint?

Before you order a match of 316A-2 Willow Branch, clean the surface, remove grease, and scuff smooth glossy areas if the substrate allows it. Mask nearby areas and test the paint on the actual material you plan to coat, because prep, texture, and substrate can change how the matched color reads.

How much MyPerfectColor paint matched to 316A-2 Willow Branch do I need for my project?

Coverage depends on surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. For 316A-2 Willow Branch, plan extra if the surface is rough, porous, dark, or if you expect more than one coat.

Where can I find the SDS for 316A-2 Willow Branch MyPerfectColor paint?

The SDS is tied to the MyPerfectColor product and chemistry, not the 316A-2 Willow Branch color name alone. Check the MyPerfectColor Safety Data Sheets page for the exact product format you plan to order, such as spray paint or another matched coating. If you use more than one format, confirm the correct SDS for each one.

Can I use 316A-2 Willow Branch MyPerfectColor custom spray paint on switch covers, vents, or brackets?

Yes. MyPerfectColor custom spray paint matched to 316A-2 Willow Branch is practical for switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar parts when you want a smooth sprayed finish. Clean and prep the part for its material, and test on the actual surface first if it is plastic, metal, or already coated.

How long does 316A-2 Willow Branch custom spray paint need before recoating or handling?

For 316A-2 Willow Branch custom spray paint, dry to touch is usually within minutes, but that is not the same as recoat or full cure. Plan to recoat in about one to two hours and allow about two weeks for full cure. Handle the part gently until the coating has had time to harden.

How quickly will I receive my paint matched to Valspar 316A-2 Willow Branch?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Valspar 316A-2 Willow Branch depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the Valspar 316A-2 Willow Branch?
The RGB values for Valspar 316A-2 Willow Branch are 209, 201, 172 and the HEX code is #D1C9AC. The LRV for Valspar 316A-2 Willow Branch is 58.33. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to Valspar 316A-2 Willow Branch? And how many spray cans do I need?

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar 316A-2 Willow Branch enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

What is the Hue Angle and Chroma for Valspar 316A-2 Willow Branch?
The Hue Angle for Valspar 316A-2 Willow Branch is 97.09 and the chroma is 15.87. The Hue Angle represents the position of a color's hue around a color wheel. The Chromacity represents the intensity of a hue. Learn more about browsing colors by hue.
Does Valspar paint color Valspar 316A-2 Willow Branch need primer?
MyPerfectColor doesn't sell Valspar paint, but it does match the Valspar 316A-2 Willow Branch and all the other Valspar colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How can MyPerfectColor color match the Valspar 316A-2 Willow Branch in paint?

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar 316A-2 Willow Branch you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

How do I convert Valspar 316A-2 Willow Branch to a different color from another paint company?

While we can provide Valspar 316A-2 Willow Branch in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.