70% of Orders Ship within 3 Business Days.
Match of US Government™ Fed Std 595C 10059 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of US Government Fed Std 595C 10059 reads as a very dark, muted brown with a warm red-yellow undertone. It has low chroma and a low LRV, so it sits close to a deep earth tone rather than a clean black or a brighter brown. MyPerfectColor supplies its own paint matched to this selected Fed Std 595C reference.
This color is useful on fabricated or maintained parts where a dark brown government reference is needed for a consistent visual match. It can be used on panels, housings, brackets, enclosures, control boxes, rails, guards, frames, switch covers, and other small metal or plastic components that are being repainted or touched up. It is often ordered when the goal is to coordinate replacement parts or repairs to a documented standard rather than guess at an aged surrounding finish.
Because 10059 is very dark, surface prep and even film build matter. Thin coverage, sanding marks, edge build, and gloss changes can be more visible than they would be in a lighter color, especially on repaired areas next to older coatings. A code match also does not recreate fading, weathering, or project-specific approval finishes, so acceptance-critical work may need a sample panel or a match to the existing part rather than the standard reference alone.
Similar colors:
Product Data
Perfect Color Ventures LLC DUNS Number and CAGE Code
MyPerfectColor DUNS Number: 117438928
MyPerfectColor CAGE Code: 8SUA4
MyPerfectColor is compliant with section 889. Download the Record of Section 889 Representations PERFECT COLOR VENTURES LLC.
About US Government Federal Standard (now Aerospace Material Specification / AMS) 595 Colors. Fed-Std-595C / FED STD 595 Colors
The Federal Standard (now Aerospace Material Specification / AMS) 595 colors are used to specify colors for US Government applications. The color are used by the US Government agencies, branches and suppliers. The most common requests we receive for Fed Standard Colors are for spray paint, Direct to Metal and other paints for prototyping, marking and identification and touchup applications. Typical clients include the USCG, all branches of the Armed Services, the State Department, Lockheed Martin and Boeing. For example, we provided paint to the Navy for marking shells with the specific Fed Std color designated to identify the type of round.
We offer 5 standard sheens in our lacquer touchup paint: flat, low lustre, satin, semi-gloss or gloss. We also offer a full range of Alkyd and Acrylic Direct To Metal paints. Please contact us if you have any questions. Please submit RFQs to [email protected]
The colors in the Federal Standard set have no official names and are identified by five-digits. The numbers designate the sheen, color classification and color intensity.
The first digit will be 1,2 or 3 and indicates the level of sheen:
1 = gloss
2 = semi gloss
3 = matt
The second digit indicates the color group;
0 = Brown 5 = Blue
1 = Red 6 = Grey
2 = Orange 7 = Other (white, black, violet, metallic)
3 = Yellow 8 = Fluorescent
4 = Green
The third to fifth digits indicate the intensity. Lower numbers indicates a darker color and higher numbers indicate a lighter color.
While the Fed Std colors indicate sheen as part of the 5 digits, MyPerfectColor still requires you to enter a specific sheen. For example, the color Fed Std 37038 technically refers to a matte finish, but MyPerfectColor offers it in any sheen.
Frequently Asked Questions About Match of US Government™ Fed Std 595C 10059 *
What does Fed Std 595C 10059 mean when I order MyPerfectColor paint?
A match of US Government Fed Std 595C 10059 is a government color reference target, not a complete coating specification. When you order MyPerfectColor paint matched to US Government Fed Std 595C 10059, you are choosing the color reference only. You still need to decide the product format, gloss, surface prep, primer, and coating system for the job.
If your project also requires a specific chemistry or approval status, check that requirement separately before ordering.
Will MyPerfectColor match an old part that is already painted Fed Std 595C 10059?
Not always. Even if the original code is Fed Std 595C 10059, an older in-service coating can look different because of fade, weathering, sheen changes, texture, or a different original paint system. A fresh match to the standard can be correct and still appear different next to an aged part.
If the repair area is highly visible or the surrounding finish has aged, a match to the existing part or a full-part repaint may be the better choice.
If my drawing or procurement package calls for Fed Std 595C 10059, is a color match enough for acceptance?
Not by itself in every case. A color match to US Government Fed Std 595C 10059 can satisfy the color reference, but some jobs require an approved sample panel, an existing-part match, or a project-specific approval step before the finish is accepted.
If the work is inspection-critical or controlled by engineering, use the project documents to confirm whether the code alone is sufficient or whether additional submittals are required.
How should I prep metal or an existing coating before applying Fed Std 595C 10059 paint?
Start by cleaning and degreasing the surface, then scuff or abrade it as needed so the new coating can bond properly. If the part has rust, corrosion, loose paint, or other defects, address those issues before painting. On metal or mixed substrates, primer selection matters, so choose a primer that fits the substrate and the product you are using.
Because adhesion can vary by surface, test the MyPerfectColor match of US Government Fed Std 595C 10059 on the actual part or a sample area before coating the full piece.
What should I know about dry time and recoat timing for Fed Std 595C 10059 paint?
Dry-to-touch, recoat time, and full cure are different stages, so do not treat them as the same thing. The correct timing depends on the MyPerfectColor product format you select for a match of US Government Fed Std 595C 10059, such as spray paint or another liquid-paint option.
Plan the project around the product instructions for that format, and do not handle or stack coated parts until the coating has reached the required stage for your application.
When will I receive my paint matching US Government Fed Std 595C 10059? Can I get it right away?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match US Government Fed Std 595C 10059 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the LRV, HEX, and RGB values for the US Government Fed Std 595C 10059?
The RGB values for US Government Fed Std 595C 10059 are 82, 63, 58 and the HEX code is #523F3A. The LRV for US Government Fed Std 595C 10059 is 5.69. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors and Light Reflectance Values.
What paint type is used to make spray paint matched to US Government Fed Std 595C 10059? And how many spray cans do I need?
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to US Government Fed Std 595C 10059 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
Does US Government paint color US Government Fed Std 595C 10059 need primer?
MyPerfectColor doesn't sell US Government paint, but it does match the US Government Fed Std 595C 10059 and all the other US Government colors in a wide variety of paint types. The need for primer depends on the specific paint and the substrate being painted. The top quality paints these days tend to be self-priming over most surfaces, while paint at the mid to lower grade quality levels will need a separate primer. Most special situations such as bleeding type woods or difficult to adhere surfaces like plastic will often need a specialty primer. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project and whether you need a primer.
How do I buy paint in the US Government Fed Std 595C 10059?
Many types of paint are available for US Government Fed Std 595C 10059 with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to US Government Fed Std 595C 10059?
The US Government Fed Std 595C 10059 is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
How do I get a Certificate of Conformance (CofC) for the US Government Fed Std 595C 10059?
Contact MyPerfectColor support if you need a certificate of conformance for US Government Fed Std 595C 10059. We are happy to provide this with your order.
Does this US Government Fed Std 595C 10059 meet my spec?
The US Government Fed Std 595C 10059 is the color portion of the spec. The remaining part of the spec will indicate the type of paint needed. Paint can be purchased directly from the color page, but MyPerfectColor offers many additional paint types not visible from the color page. Please contact us if you are not sure what you need, you don't see what you are looking for, or you need a quote to proceed. MyPerfectColor can furnish Certificates of Conformance upon request.
Color details
RGB 82, 63, 58
HEX: #523F3A
LRV: 5.69%
Color properties
Color Type:
Standard
Hide:
Standard
Match Source:
Brochure/swatch book
Match Type:
Physical match
Textured:
No
Source on hand:
Yes
Color Category:
Standard
