Match of Sherwin Williams™ SW7514 Foothills *

The SDS applies to the MyPerfectColor product you order, not to the SW7514 Foothills color name by itself. To review the current Safety Data Sheets for the MyPerfectColor paint matched to SW7514 Foothills, use the MyPerfectColor Safety Data Sheets page at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

If you need the SDS for a specific format, check the document for that exact MyPerfectColor product and chemistry before using it on your project.

A match of Sherwin Williams SW7514 Foothills can look different after application depending on the finish you choose because sheen changes how much light the surface reflects. A flatter finish usually reads less reflective, while a glossier finish can make the same matched color look brighter or more vivid on the finished item.

If you are matching an existing painted part, try to keep the new coating and the old surface at the same sheen when possible. The color reference stays the same, but finish, texture, and film build can change the final appearance.

Yes. A match of Sherwin Williams SW7514 Foothills is a practical choice for MyPerfectColor custom spray paint when you need to coordinate small or removable items such as baskets, frames, furniture accents, shelving, decor pieces, brackets, or hardware to a known color reference.

Spray application works best when the part can be cleaned and prepared first, and when the project goal is to match the object to SW7514 Foothills rather than repaint a large wall or full room.

Before applying SW7514 Foothills, clean the metal or existing coating to remove dirt, grease, and contamination, then scuff the surface so the new coating can grip. If there is rust, loose paint, or peeling clear coat, remove those problem areas first because they can affect adhesion and the final look.

For glossy, slick, or uneven old coatings, a primer may be helpful depending on the substrate and condition. The old surface's gloss, texture, and wear can change how the matched color reads after application, so a test area is wise when the part will be seen up close.

Coverage for SW7514 Foothills depends on the surface size, texture, porosity, application method, and the number of coats needed. A typical can of spray paint covers about 20 square feet with one coat, while other MyPerfectColor paint formats typically cover between 400 and 600 square feet.

If the surface is rough, porous, dark, or uneven, plan for more paint because hide can drop and more than one coat may be needed. For a small part, one can may be enough, but for larger or high-hide projects, estimate from the actual square footage and add extra if you expect multiple coats.

MyPerfectColor has an original sample of the Sherwin Williams SW7514 Foothills in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW7514 Foothills. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW7514 Foothills, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.