Match of Sherwin Williams™ SW2033 Foothills *

For MyPerfectColor custom spray paint matched to SW2033 Foothills, dry-to-touch is typically within minutes, but that is not the same as ready for recoating or full handling. Plan on recoating in about 1 to 2 hours, and allow about 2 weeks for full cure before subjecting the item to heavier use or stacking.

If the part needs to be installed, assembled, or shipped quickly, treat the dry-to-touch stage as only an early milestone. Recoat and cure time can affect whether the finish marks, prints, or bonds well between parts.

Lighting, placement, sheen, texture, and nearby surfaces can all change how SW2033 Foothills reads after a MyPerfectColor match is applied. The color reference stays the same, but the finished item may look different on a glossy part than on a matte one, or beside an older painted surface versus a freshly coated one.

If the part will sit next to an existing surface, treat that as a higher-risk match and test on the actual item whenever possible. This is especially useful when the final approval depends on how the coated part looks in its real location.

Yes. A match of Sherwin Williams SW2033 Foothills can be ordered as MyPerfectColor custom spray paint for many small parts where a smooth, durable sprayed finish is more practical than brushing. Common examples include switch covers, knobs, vents, speaker grilles, brackets, trim pieces, hardware, and similar removable items.

Spray application is usually a good fit when you want consistent coverage on small or awkward shapes. Before ordering, make sure the item can be removed or masked safely and that the substrate is something you can prepare properly for paint adhesion.

Before applying MyPerfectColor paint matched to SW2033 Foothills, clean the surface, remove grease or residue, and lightly scuff where appropriate so the coating can bond better. Mask off areas that should not be painted, and test on the actual surface before doing the full project.

Good prep matters on metal, plastic, wood, and previously coated items. If the surface is smooth, glossy, or unfamiliar, a test application is the safest way to confirm adhesion and check how the color and finish will read on that specific item.

The SDS is tied to the MyPerfectColor product and chemistry, not to the SW2033 Foothills color name alone. If you need safety information before ordering or using the product, check the MyPerfectColor Safety Data Sheets for the specific paint format you plan to buy.

You can find the SDS information here: MyPerfectColor Safety Data Sheets.

MyPerfectColor has an original sample of the Sherwin Williams SW2033 Foothills in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2033 Foothills. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2033 Foothills, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.