Match of Sherwin Williams™ SW6313 Kirsch Red *

Coverage depends on the size of the part, surface texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover about 400 to 600 square feet. For SW6313 Kirsch Red, plan extra material if the surface is rough, porous, or a darker color that may need more build to cover evenly.

Measure the actual surface, then add allowance for overspray, edges, and a second coat if the part needs it.

Plastics vary a lot, so test on the actual part before painting the full item. MyPerfectColor spray paint sticks well to most plastics, but some plastics need different prep or a primer to improve adhesion. Using the MyPerfectColor primer can help when the substrate is hard to bond to.

If you are painting plastic trim, vents, housings, or other molded parts in SW6313 Kirsch Red, clean the surface first, use the right prep for that plastic, and apply light coats so you can confirm how the match performs on the real material.

Choose sheen based on how the part will be used, how easy it needs to be to clean, and how much reflectivity you want on the finished surface. Higher gloss usually cleans more easily and reflects more light. Lower gloss is less reflective and can hide some surface flaws better.

The same SW6313 Kirsch Red match can look different as the sheen changes, so the finish is a practical ordering choice, not just a style choice. If the item will be handled often or cleaned regularly, that should guide the sheen you select.

The SDS is tied to the MyPerfectColor paint product and chemistry, not to the SW6313 Kirsch Red color name alone. Check the MyPerfectColor Safety Data Sheets page for the exact product type you plan to order.

If you are comparing spray paint, brush-in-cap bottles, or another MyPerfectColor format, make sure you review the SDS for that specific product rather than assuming every format shares the same document.

Apply light, even coats from a consistent distance and overlap each pass slightly. Avoid heavy wet passes, which can cause runs, uneven sheen, or a muddy looking color build in SW6313 Kirsch Red.

Let each coat flash off before adding the next one. On unfamiliar surfaces, do a test application first so you can confirm how the match lays down and whether the substrate needs extra prep.

MyPerfectColor has an original sample of the Sherwin Williams SW6313 Kirsch Red in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6313 Kirsch Red. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6313 Kirsch Red, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.