Looking for color by Hex, RGB, CMYK, or Lab?

Match of Benjamin Moore™ AC-26 Ozark Shadows *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Benjamin Moore AC-26 Ozark Shadows is a muted light-to-medium neutral with a gray-beige body and a slight warm, yellowed undertone. It reads soft rather than crisp, with low chroma and an understated character that sits between beige and gray without pushing strongly in either direction.

That restrained look makes it useful for spray-painted parts where the goal is to coordinate a visible component without drawing attention to it. MyPerfectColor custom spray paint matched to AC-26 Ozark Shadows can be used on vents, return grilles, switch plates, access panels, shelving brackets, mailbox bodies, railings, PVC trim pieces, and furniture hardware. It is also a practical choice for baskets, frames, speaker grilles, and other small accessories that benefit from a calm neutral finish.

Because the color is muted and not highly saturated, it usually covers more predictably than vivid colors, but substrate color and surface texture still matter. Thin film build can let darker or uneven surfaces show through, especially on plastic or previously coated parts. Finish also changes the read of the color: glossier sheens can make the warm undertone more noticeable, while flatter finishes tend to soften it.

Similar colors:

1473 Gray Husky
OR-418 Bottlenose Dolphin
GN-46

Product Data

About Benjamin Moore Paints

Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore AC-26 Ozark Shadows.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Benjamin Moore™ AC-26 Ozark Shadows *

Does the finish change how AC-26 Ozark Shadows looks after it is applied?

Yes. A match of Benjamin Moore AC-26 Ozark Shadows is the color target, but sheen and film build change how it reads on the finished item. A glossier coating reflects more light, so the same match can look different than a flatter coating on the same part. The substrate also matters, so the color may read a little differently on smooth metal, textured plastic, or a previously coated surface.

If you are matching an existing part, compare the finish you plan to use and the actual surface, not the color code alone. MyPerfectColor supplies a match to AC-26 Ozark Shadows, and the final appearance is affected by the coating system and application.

Can I use AC-26 Ozark Shadows on plastic parts, and what prep should I expect?

Yes, AC-26 Ozark Shadows can be used for plastic projects, but plastics vary a lot. Test the actual material first if the part is important, visible, or made from an unfamiliar plastic. Surface cleaning and proper prep matter because slick or low-energy plastics can reduce adhesion.

MyPerfectColor spray paint is intended for many plastic applications, and using the MyPerfectColor primer for Acrylic Enamel can improve adhesion on difficult plastics. If you are unsure about the exact substrate, do a test spray on the same material before coating the full part.

What prep should I do before spraying AC-26 Ozark Shadows over metal or an existing coating?

Before applying AC-26 Ozark Shadows to metal or an older painted surface, clean off oil, dust, wax, and other contamination. If there is rust, corrosion, peeling paint, or loose coating, remove or stabilize it first. Scuffing the surface can also help the new coating adhere.

The condition of the old finish affects the result. Gloss, texture, and wear on the existing coating can change how AC-26 Ozark Shadows looks after application, so a test area on the actual part is a good way to check adhesion and appearance before committing to the full job.

How long does AC-26 Ozark Shadows spray paint need to dry and cure?

For MyPerfectColor spray paint, AC-26 Ozark Shadows is typically dry to the touch within minutes. Recoating is usually best after about 1 to 2 hours, depending on conditions and how heavily the coat was applied.

Dry to the touch, ready for another coat, and fully cured are different stages. The coating should be handled carefully until it has had time to cure, which is about 2 weeks. If the part will be installed or put into service quickly, allow for that cure time in your project schedule.

How do I confirm I am ordering the correct AC-26 Ozark Shadows match before I buy?

Confirm AC-26 Ozark Shadows from a physical swatch or a known existing color reference, not from a screen alone. MyPerfectColor matches the original brand color standard, so the goal is to verify the target color before you place the order.

For Benjamin Moore colors like AC-26 Ozark Shadows, MyPerfectColor supplies its own custom-matched paint in non-housepaint formats such as spray paint and other specialty formats. It is not the original Benjamin Moore paint product, so make sure the reference you approve is the color you actually want matched.

How quickly will I receive my paint matched to Benjamin Moore AC-26 Ozark Shadows?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Benjamin Moore AC-26 Ozark Shadows depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the RGB, HEX and LRV values for Benjamin Moore AC-26 Ozark Shadows?
The RGB values for Benjamin Moore AC-26 Ozark Shadows are 182, 178, 172 and the HEX code is #B6B2AC. The LRV for Benjamin Moore AC-26 Ozark Shadows is 44.76. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about Light Reflectance Values and using RGB and Hex codes for paint.
What is spray paint matched to Benjamin Moore AC-26 Ozark Shadows made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore AC-26 Ozark Shadows enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

Is Benjamin Moore Paint used to make Benjamin Moore AC-26 Ozark Shadows?

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

Can I buy Benjamin Moore AC-26 Ozark Shadows locally?
You would have to ask around locally. MyPerfectColor can make and ship the Benjamin Moore AC-26 Ozark Shadows in a variety of paint types, but we are not able to comment on what other suppliers can provide. MyPerfectColor is not just working off a formula in a database - we compare every batch against the original color to verify the color accuracy. MyPerfectColor has extensive color matching capabilities and more than ten times the number of pigments available to a typical paint store.
How do I convert Benjamin Moore AC-26 Ozark Shadows to a different color from another paint company?

While we can provide Benjamin Moore AC-26 Ozark Shadows in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.