Match of Valspar™ SR1202 Blue Seafoam *

Start by cleaning off dirt, dust, oils, wax, and grease. Let the surface dry fully, then scuff it lightly if the material and condition call for it. Mask off any areas you do not want coated. Before doing the full project, test a small area on the actual surface so you can confirm adhesion and see how MyPerfectColor's match of Valspar SR1202 Blue Seafoam behaves on that material.

Choose the finish based on how the item will be used and cleaned, not just the color name. Higher gloss reflects more light and can make a matched color read differently on the finished piece, while flatter finishes reduce reflectivity and may be easier to live with on parts that do not need shine. If you are ordering MyPerfectColor paint matched to Valspar SR1202 Blue Seafoam, pick the sheen that fits the wear level, cleanup needs, and substrate for that specific item.

For spray application, plan on dry to touch in minutes, recoating in about one to two hours, and full cure in about two weeks. Dry to touch, recoat, and full cure are different stages, so do not treat them as the same thing. If you are spraying a match of Valspar SR1202 Blue Seafoam, let each coat set up before adding the next one.

The SDS is tied to the specific MyPerfectColor product and chemistry you are buying, not to the color name alone. To get the correct sheet for a match of Valspar SR1202 Blue Seafoam, use the MyPerfectColor Safety Data Sheets page for the exact product format you plan to order. That is the safest way to confirm the right safety information for the paint you will use.

Yes, but plastic types vary and prep can change the result. MyPerfectColor spray paint sticks well to most plastics, but some plastics and other low-energy surfaces need different preparation, so testing on the actual item is important. Using the MyPerfectColor primer can improve adhesion before you apply a match of Valspar SR1202 Blue Seafoam. If the part is removable or hard to replace, test a small area first.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar SR1202 Blue Seafoam enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar SR1202 Blue Seafoam you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.

While we can provide Valspar SR1202 Blue Seafoam in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.