70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Valspar SR601 Beeswax is a very light warm neutral with a soft cream-beige character and a gentle yellow undertone. It reads pale and muted rather than clean or bright, with enough warmth to feel creamy but not so much chroma that it becomes a strong yellow.
MyPerfectColor custom spray paint matched to the selected brand color can be used on PVC pipe, vents, switch covers, speaker grilles, railings, shutters, mailboxes, frames, brackets, and small hardware where a light coordinated finish is needed on a separate part or accessory. It also fits baskets, shelving supports, cabinet pulls, and fixture details when a pale, warm neutral is the target.
Because this is a light color, darker or uneven substrates may show through more readily and may need additional coats for even coverage. Surface preparation, film build, and finish choice can change how creamy or yellow the color reads, and gloss can make texture or sheen differences more noticeable on the finished part.
Similar colors:
230A-1 Blazing Star
3008-6C Linen Napkin
3007-4C Oyster Bisque
The Valspar Corporation is a manufacturer of paint and coatings based in Minneapolis, Minnesota. Valspar was founded in 1806 as a paint dealership in Boston, Massachusetts. The Valspar name emerged in 1903 as the name of a clear varnish and became the company name in 1932. Sherwin-Williams acquired Valspar in June 2017.
MyPerfectColor is able to match all of the Valspar paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Valspar SR601 Beeswax by matching the original Valspar color books and swatches. MyPerfectColor does not use Valspar paint.
The colors shown on this website are computer video simulations of the Valspar SR601 Beeswax and may not match Valspar Color standards. Refer to Valspar Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Valspar SR601 Beeswax. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve the best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor Safety Data Sheets are tied to the specific paint product and chemistry, not the color name alone. For SR601 Beeswax, check the Safety Data Sheets page for the MyPerfectColor product you are ordering so you are looking at the correct SDS for that paint format.
Confirm SR601 Beeswax from a physical swatch, an original brand color reference, or a known existing sample whenever possible. Do not rely on screen viewing alone. MyPerfectColor matches the selected brand color reference, so the key order decision is whether SR601 Beeswax is the exact target color you want.
Yes. A match of SR601 Beeswax in custom spray paint is a practical option for switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar parts when you want a sprayable finish. Make sure the substrate is prepared correctly for the material you are coating, since adhesion and final appearance depend on the surface.
For spray paint matched to SR601 Beeswax, expect it to be dry to the touch within minutes, ready for recoating in about 1 to 2 hours, and fully cured in about 2 weeks. Dry to the touch, recoat time, and full cure are different stages, so avoid heavy handling until the coating has had time to cure.
It depends on the substrate, its condition, and the product format you are using. A primer never hurts and can improve adhesion, but it is not always required. Check the prep guidance for the specific MyPerfectColor product matched to SR601 Beeswax, especially on bare, slick, or hard-to-coat surfaces.
MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Valspar SR601 Beeswax enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
MyPerfectColor has hundreds of color books in its archive, including the original Valspar paint color books. The color Valspar SR601 Beeswax you are looking for is in our library. We are able to make paint and verify that it matches the original.
Please note that if you are trying to touch up, the paint on your wall now is likely different than it was when first painted. MyPerfectColor will be sending the original color which may no longer match your walls. Learn more about color matching accuracy and our color matching service.
While we can provide Valspar SR601 Beeswax in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.