Match of Kelly Moore™ KM4101-2 Topaz Tease *

Coverage depends on the size of the item, the texture of the surface, the hiding power needed, the application method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat.

If you are ordering a non-spray format, coverage is often much higher, typically about 400 to 600 square feet per unit, but the exact result still depends on the surface and application. For KM4101-2 Topaz Tease, measure the actual painted area and allow extra for edges, test spraying, and any second coat you may need.

The finish changes both durability and how KM4101-2 Topaz Tease reads on the finished item. Higher gloss finishes usually reflect more light, are easier to clean, and can make the matched color look different than a flatter finish. Flatter finishes reduce reflection and can make the same color appear softer.

Choose the sheen based on the surface use and the look you need on the actual part, not just the color name. If you are trying to coordinate with an existing coated item, remember that gloss level can affect whether the match appears consistent.

For KM4101-2 Topaz Tease, start with a clean surface. Remove dirt, grease, wax, and loose material, then mask off any areas you do not want painted. Light scuffing can help when the surface is smooth and appropriate for the substrate.

Because prep affects adhesion and final appearance, test the paint on the actual surface before doing the full project. That is especially useful if the item is already coated, has an unusual finish, or will be handled often.

Yes, but plastics vary widely, so KM4101-2 Topaz Tease should be tested on the actual part before you commit to the full job. MyPerfectColor spray paint sticks well to most plastics, but some plastic types need different prep or a primer to improve adhesion.

If you want extra adhesion help, use the MyPerfectColor primer for acrylic enamel. That is especially important on plastic items where the surface is smooth, flexible, or otherwise hard to coat reliably.

Yes. A match of Kelly Moore KM4101-2 Topaz Tease is a practical choice for small parts and hardware such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar items where a smooth spray finish is useful.

For these projects, spray application is often the easiest way to get even coverage on removable parts. Make sure the piece is cleaned, masked if needed, and tested first if the substrate is plastic or already coated.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Kelly Moore KM4101-2 Topaz Tease enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Kelly Moore KM4101-2 Topaz Tease in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Kelly Moore KM4101-2 Topaz Tease in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.