Match of Sico™ 6107-42 Salamander *

It depends on the substrate, surface condition, and the paint format you are ordering. A primer is not always required, but it can improve adhesion and help the finish perform better, especially on bare, porous, glossy, repaired, or problem surfaces.

If you are painting spray-ready items like trim pieces, vents, hardware, pipe, or removable fixtures, check the prep guidance for the specific MyPerfectColor product matched to 6107-42 Salamander. When in doubt, priming first is usually the safer choice for adhesion and consistency.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. For planning, a typical can of spray paint covers about 20 square feet with one coat. Other paint formats usually cover about 400 to 600 square feet, but actual yield can be lower on rough or porous surfaces.

If you are coating items such as shutters, mailboxes, vents, railings, PVC pipe, or small fixtures, estimate extra material if the surface is textured or if the existing color is dark and may require more than one coat to cover the match of 6107-42 Salamander evenly.

Yes, but plastics vary a lot, so testing on the actual material is important before you paint the full part. MyPerfectColor spray paint sticks well to most plastics, but some low-energy plastics may still need extra prep or a primer to improve adhesion.

If you are coating items like PVC pipe, vents, grilles, covers, brackets, or other plastic accessories in 6107-42 Salamander, do a test application first and follow the prep steps for the specific product. Using the MyPerfectColor primer can help improve adhesion on difficult plastic surfaces.

Choose the finish based on how the item will be used and how much durability, cleanup, and reflectivity you want. Higher gloss finishes are usually easier to clean and more reflective, while lower gloss finishes reduce shine. The sheen also changes how 6107-42 Salamander will look on the finished item, even when the color match is correct.

If you are coating parts such as railings, hardware, fixtures, or removable accessories, pick the finish that fits the service conditions and the surface you are painting. The same color can read differently in matte, satin, or gloss because of the way light reflects off the coating.

The SDS is tied to the MyPerfectColor product and chemistry, not to the Sico color name alone. If you are ordering a match of 6107-42 Salamander, use the SDS for the specific MyPerfectColor paint product you plan to buy.

You can find MyPerfectColor Safety Data Sheets on the MyPerfectColor Safety Data Sheets page. If you need the SDS for a spray paint, brush-in-cap bottle, or another format matched to 6107-42 Salamander, make sure you are reviewing the sheet for that exact product type.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Sico 6107-42 Salamander enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Sico 6107-42 Salamander in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Sico 6107-42 Salamander in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.