RAL 7002 Olive Grey Paint

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL7002 Olive Grey is a mid-value, olive-influenced grey with a lightness (L) of 51.66 and a low light reflectance value (LRV) of 19.84. This means it appears deeper than standard wall colors, creating a subdued, non-reflective field. With a hue angle of 90.63 degrees, minor 'a' value (-0.14), and 'b' value (12.67), the color sits on the edge between very slightly cool and almost neutral. The chroma level manifests as a distinct olive-gray tone-less saturated than a sage or army green, but more colored than a neutral grey. RAL7002 is not particularly sensitive to finish, though higher gloss may bring out faint warmth from the olive component.

RAL7002 Olive Grey is commonly specified for machinery, enclosures, and fabricated metalwork in industrial areas, as well as facility maintenance repainting, equipment touch-ups, and for painted parts where a non-distracting, medium-dark finish is essential. It is especially effective where a functional, non-flashy appearance is needed. This color's moderate depth (LRV 19.84) helps conceal grime and minimize reflection under harsh lighting. The olive cast dampens visual contrast, blending with camouflaged or natural backdrops. For projects requiring precise matches, consider how finish and substrate may shift appearance between powder, spray, or brush application.

Digital approximations
Values
HEX: #847A66
RGB: 132, 122, 102
LAB: 51.7, -0.1, 12.7
Insights
- With L = 51.7 and LRV = 19.84, the color is clearly mid-tone but reads darker on large surfaces or low lighting.
- The moderate b (12.7) and chroma yield a subdued olive hue-muted, not overtly green or brown.
- The near-neutral a (-0.1) supports its versatility, providing neither strong warmth nor coolness.
Digital values are approximations.
Paint appearance varies by finish and lighting.

Similar colors:
RAL 7033 Cement Grey - lighter, less olive-toned, and more neutral
RAL 7003 Moss Grey - slightly darker and greener, with a more pronounced earthiness
RAL 7030 Stone Grey - similar value but less chromatic, appearing more classic grey than olive

Product Data

See Technical Data Sheets
See Safety Data Sheets

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 7002 Olive Grey Paint

When is the standard RAL 7002 Olive Grey sufficient, and when should we request a sample/OEM match?

RAL codes define the color target only, not the coating chemistry, gloss, or texture. Decide acceptance first, then choose the approach:

Use standard RAL 7002 Olive Grey when:
- Acceptance is against the RAL standard (not an existing part).
- Cross-material coordination is needed and some sheen/texture variation is acceptable.
- Low-criticality touch-ups where close visual harmony is sufficient.
Request a sample/OEM match when:
- High-visibility cosmetic surfaces or large-area repaints.
- Formal inspection criteria (tight tolerances, signed samples, or buyer approval required).
- You must match an existing coated part (especially textured or specific powder formulation).
- A known OEM or powder code exists and must be matched.

Risks to consider: Powder vs. liquid will differ in sheen/texture; identical colorants can appear different under varied lighting and film builds. If acceptance is against the existing part, a standard RAL order may be rejected.

Recommended actions: State acceptance basis on your PO ("match RAL 7002" vs. "match supplied part"), provide target gloss (60 degrees GU) and any texture, and review a small production sample or drawdown under your site lighting before full release.

What sheen should we order for RAL 7002 Olive Grey to pass inspection on our job?

Match sheen to your acceptance criteria and the existing finish:

If the drawing/spec states gloss (e.g., "RAL 7002 Olive Grey, 30±5 GU @60 degrees"): order to that target and include the tolerance on the PO.
If matching an existing powder coat: measure gloss at 60 degrees on a flat area or send a part for a gloss/color read. Texture can lower measured gloss and change the look even at the same GU.
Practical guidance:
- For field touch-up on matte or textured parts, a slightly lower sheen often blends edges better and minimizes halos.
- For acceptance against the RAL standard rather than the part, pick and communicate a gloss range (common bands: matte ~10-20 GU, satin ~25-35 GU, semi ~50-70 GU) and keep texture minimal.
- Avoid high gloss over textured powder-differences in orange peel/texture will be more obvious.

Include with your order: intended application method (spray/touch-up), target 60 degrees gloss (and tolerance), substrate, and whether acceptance is against the RAL standard or an existing part. This reduces rework and rejection risk.

How should we prep a chipped surface for RAL 7002 Olive Grey touch-up or repaint to avoid adhesion or color issues?

Proper prep prevents failure and minimizes color mismatch:

Identify the substrate and existing coating (powder vs. liquid, galvanized/aluminum/steel). If unknown, provide a sample or part photo and note prior coatings.
Clean and decontaminate: remove oils/silicones with a suitable degreaser; rinse or solvent-wipe; dry completely.
Rust and damage repair: remove corrosion to bright metal; feather chip edges 1-2 inches with 320-600 grit or non-woven abrasive.
Scuff/degloss surrounding area for adhesion; avoid polishing the surface.
Prime where required: bare ferrous-use a corrosion-resistant primer; aluminum/galvanized-use compatible wash/etch or epoxy primer; plastics-use an adhesion promoter. Allow proper flash/cure.
Test before committing: apply a small spray-out or test patch of RAL 7002 Olive Grey, let it fully dry/cure, then check color under your site lighting and perform a simple tape adhesion check.
Apply and blend: use light coats, extending slightly beyond the repair to blend; avoid heavy wet coats that create halos or gloss bands.
Cure and inspect: verify film build and full cure per product data before sign-off. Final inspection should use consistent, neutral lighting.

Note: Do not assume an exact visual match to an unknown or aged coating. If appearance is critical, request a match to the actual part rather than ordering a generic RAL.

When will I receive my paint matching RAL7002 Olive Grey? Can I get it right away?

All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL7002 Olive Grey, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.

Can I use RAL7002 Olive Grey for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL7002 Olive Grey is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL7002 Olive Grey?

The RGB values for RAL7002 Olive Grey are 132, 122, 102 and the HEX code is #847A66. The LRV for RAL7002 Olive Grey is 19.84. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.

What is spray paint matched to RAL7002 Olive Grey made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL7002 Olive Grey enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL7002 Olive Grey?

Many types of paint are available for RAL7002 Olive Grey with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.

How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL7002 Olive Grey?

The RAL7002 Olive Grey is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.

Do I need a primer for RAL7002 Olive Grey?

The need for primer for RAL7002 Olive Grey depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.

How do I convert RAL7002 Olive Grey to a different color from another paint company?

While we can provide RAL7002 Olive Grey in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.