RAL 7001 Silver Grey Paint

Send a sample when acceptance will be judged against an existing coated part or assembly rather than the RAL standard chip. This avoids rework and returns.

• Match-to-part required: You need the new paint to match an existing powder-coated or aged part in appearance.
• High-visibility or large areas: Panels, doors, enclosures, or continuous surfaces where small differences are noticeable.
• Strict inspection: Acceptance is side-by-side against an existing part, or a defined tolerance will be enforced.
• Known OEM powder code: The spec cites a powder brand/code, gloss, and texture that must be mirrored in liquid paint.
• Unknown legacy finish: The original supplier/finish parameters are unknown and prior touch-ups were rejected as "close but not exact."

What to send and specify:

• A clean, representative sample (flat area at least 2×3 in / 50×75 mm) showing the target color, gloss, and texture.
• State whether to match the existing part's appearance or the RAL 7001 Silver Grey standard chip.
• Note finish details (approximate gloss, texture, and any orange peel/metallic effects) and inspection conditions (lighting, distance).
• Indicate product type needed (e.g., liquid for brush/spray, aerosol) and any performance requirements.

Custom matching adds lead time and cost but reduces acceptance risk when exact appearance alignment is required.

Use the full code and confirm it at the source. RAL 7001 must be specified by number; names alone (e.g., "Silver Grey") are not sufficient.

• Verify the exact code on the drawing or spec; if it only lists a name, request confirmation of "RAL 7001."
• Avoid relying on screen swatches; verify against a physical RAL Classic fan deck if needed.
• Include finish attributes on the PO: color (RAL 7001 Silver Grey), desired gloss (e.g., matte/satin/gloss or GU range), texture requirement (if any), and product type.
• If the requirement is actually "match existing part," do not order by code alone-see the sample-matching guidance.

PO line example: Color: RAL 7001 Silver Grey; Finish: 60 GU semi-gloss, smooth; Product: liquid/aerosol; Reference: RAL Classic.

Not necessarily. RAL defines the color target, not the coating process. Differences in gloss and texture between powder and liquid can make two "RAL 7001" finishes look different side-by-side.

• Standard reference: If acceptance is against the RAL 7001 standard chip, a standard liquid mix in RAL 7001 is appropriate (select a gloss close to the requirement).
• Match to existing part: If acceptance is against your powder-coated part, specify a sample match or provide the powder brand/code, gloss (GU), and texture so the appearance can be aligned.
• Expect texture effects: Liquid touch-up is smoother; on fine or heavy textures, the same color can appear lighter/darker. Choose an appropriate gloss or request a custom match.
• Risk control: For visible areas or large patches, test a small area or order a sample panel before full application.

Often yes. For components with different textures or sheen, viewed separately (not edge-to-edge), a standard mix of RAL 7001 typically provides acceptable visual harmony.

• Suitable cases: Hardware, conduit, brackets, fasteners, and small touch-ups where close coordination is sufficient.
• Specify finish: Indicate desired gloss (matte/satin/gloss) to align appearance across materials.
• Use caution: For large co-planar panels or high-visibility surfaces under uniform lighting, consider a sample-based match to the dominant surface.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL7001 Silver Grey is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL7001 Silver Grey enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL7001 Silver Grey in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.