Looking for color by Hex, RGB, CMYK, or Lab?

RAL 6014 Yellow Olive Paint

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL6014 Yellow Olive is a deep, muted olive with minimal chroma, widely specified for functional and industrial surfaces requiring low reflectance. With very low lightness (L=25.55, LRV 4.6), it appears almost as a dark olive-drab in most lighting, and has a near-neutral earth tone with a subtle yellow bias. Its low chroma (10.46) means there is minimal saturation, helping to avoid brightness and overt color, and supporting its role in camouflage and low-visibility settings. RAL6014 maintains a muted appearance in both matte and gloss, with no dramatic highlights, and is commonly used for field equipment, military vehicles, utility cabinets, site boxes, exterior pipework, repairs, heavy machinery, and architectural metalwork where low glare and blend-in qualities are key.

RAL6014 Yellow Olive is reliably functional where understated appearance and minimal reflectance are needed. The restrained olive cast and near-neutral undertone prevent noticeable shifts across lighting conditions, though its very low LRV means surfaces will appear darker than midtones. Low chroma ensures it rarely reads as green or yellow in practical use, and matte finishes are typical for anti-glare demands. Compare visually if matching older finishes, as subtle shifts may develop over time.

Digital approximations
Values
HEX: #443C2D
RGB: 68, 60, 45
LAB: 25.6, 0.8, 10.4
Insights
- Extremely low L (25.6) and LRV (4.6) yield a very deep, dark color that absorbs more light than it reflects.
- Near-neutral a (0.8) and modest b (10.4) give a subdued, earthy olive; the color avoids overt warmth or green saturation.
- Chroma (10.46) is low, so the color reads more as a dark neutral than a vibrant olive.
Digital values are approximations.
Paint appearance varies by finish and lighting.

Similar colors:
RAL 6011 Reseda Green - lighter, softer green with higher chroma and more apparent color.
RAL 6006 Grey Olive - slightly cooler, grayer and even less chromatic.
RAL 6020 Chrome Green - deeper, markedly more saturated green tone.
RAL 7013 Brown Grey - more neutral, with a browner and less olive appearance.

Product Data

About RAL

RAL is a European Color Standard often used for powder coating products and equipment. MyPerfectColor helps manufacturers; fabricators; refurbishers; equipment supply, rental and maintenance organizations save money and improve quality through exact match color solutions. Some common requests we receive for RAL Colors include spray paint, pens and bottles used for touch up and OEM applications.

Representation of the RAL Colours is done with the approval of RAL gGmbH, 53111 Bonn, Germany.

Please note that the representation of colours on the website can only approximate the actual RAL colour shades as they are registered as varnish samples.

RAL CLASSIC © RAL, Bonn 2019.

RAL DESIGN SYSTEM © RAL, Bonn 2019.

RAL EFFECT © RAL, Bonn 2019.

RAL colors may vary from RAL Color Standards based on lighting conditions, angle of view and/or due to differences in pigments, manufacturing process, substrate and/or limitations in the color capability of the paint.

Frequently Asked Questions About RAL 6014 Yellow Olive Paint

For RAL 6014 Yellow Olive, when is a standard RAL match sufficient and when should I request a sample/OEM-based match?

Use a standard RAL 6014 Yellow Olive match when the goal is to hit the RAL color target and minor differences in sheen or texture are acceptable. Remember: the RAL code defines a color target, not the coating process.

  • Standard RAL is typically sufficient for:
    • Cross-material coordination where textures/sheens already differ (e.g., metal, plastic, rubber).
    • Low-criticality touch-ups (chips, edge wear) where functional protection matters most.
    • Cases where acceptance will be judged against the RAL standard, not an existing part.
  • Request a sample or OEM-based match when:
    • High-visibility surfaces or large, contiguous areas will be repainted.
    • Strict inspection/acceptance criteria apply (e.g., controlled lighting or documented tolerances).
    • You must match an existing coated part's appearance (including gloss and texture), or you have a specific OEM powder code/series and gloss level.

If a non-standard match is required, provide: a physical sample of the accepted part (or the exact OEM powder brand/series/gloss), target gloss (matte/satin/gloss or GU @60 degrees if known), substrate and application method, and how acceptance will be judged (visual comparison vs instrumented tolerance). Dark colors like RAL 6014 make gloss differences more apparent-specify gloss if it matters.

What primer should I use under RAL 6014 Yellow Olive for steel, aluminum, galvanized, or plastics?
  • Carbon steel (bare or repaired):
    • Clean, remove rust/scale, and create profile (abrasive blast or thorough sanding).
    • For maximum corrosion resistance: zinc-rich primer, then 2K epoxy build as needed.
    • For general use: 2K epoxy DTM primer. Allow proper cure before topcoat.
  • Aluminum (bare or repaired):
    • Degrease, scuff to a uniform dullness.
    • Use an etch/wash primer or chromate-free epoxy primer for adhesion, then topcoat.
  • Galvanized steel:
    • Remove mill oils/white rust, lightly scuff.
    • Use a galvanized bonding primer or 2K epoxy primer before topcoat.
  • Plastics:
    • Verify the plastic is paintable. Clean and scuff carefully.
    • Use a plastic adhesion promoter; for difficult substrates, follow with a compatible primer.

Field repairs: Feather edges, clean, and spot-prime any exposed metal with 2K epoxy. For small chips, direct-to-metal touch-up may be acceptable. A medium-to-dark grey primer often improves hide under dark colors like RAL 6014. Follow primer recoat windows; scuff if you exceed them.

Can I apply RAL 6014 Yellow Olive over existing powder coat or factory finishes?

Yes-if the existing finish is sound and properly prepared. Do not coat over failing or contaminated films.

  • Prep steps:
    • Clean thoroughly (remove oils, silicones, dirt). Rinse and dry.
    • Adhesion check: scuff a small area and perform a simple tape pull. If it fails, remove or stabilize the old coating.
    • De-gloss: uniformly scuff to a dull finish (keep texture intact if present).
    • Prime as needed: for slick/unknown powders, use an adhesion/bonding primer or 2K epoxy primer to ensure tie-coat.
    • Test patch: apply a small area of RAL 6014 and confirm adhesion and appearance before full production.
  • Acceptance considerations:
    • Existing powder coats often differ in gloss and texture from liquid touch-up. Dark colors like RAL 6014 make gloss differences more visible.
    • If acceptance will be judged against an existing part, refinish the full panel/part or request a custom match including gloss/texture.

Follow product-specific recoat and cure times before service. Application method (spray vs brush) will also affect final sheen on touch-ups.

When will I receive my paint matching RAL6014 Yellow Olive? Can I get it right away?
All paint is custom-made to order. Most orders ship quickly—often within 1–2 business days—though actual lead time can vary based on production volume. Custom spray paint, paint pens, and brush-in-cap bottles, including colors matched to RAL6014 Yellow Olive, typically ship within 1–2 business days. During peak periods, lead times may vary slightly. Transit time depends on your location and the shipping method you choose. If timing is critical, select Expedited Production at checkout—most expedited orders ship within 24 business hours—or contact MyPerfectColor so we can help confirm timing for your specific deadline. Learn more about paint production lead times.
Can I use RAL6014 Yellow Olive for touching up powder coating?

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL6014 Yellow Olive is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

What are the RGB, HEX and LRV values for RAL6014 Yellow Olive?
The RGB values for RAL6014 Yellow Olive are 73, 67, 55 and the HEX code is #494337. The LRV for RAL6014 Yellow Olive is 5.66. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about using RGB and Hex codes for matching colors.
What is spray paint matched to RAL6014 Yellow Olive made of? And how much area will one can cover?

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL6014 Yellow Olive enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

How to buy paint for RAL6014 Yellow Olive?
Many types of paint are available for RAL6014 Yellow Olive with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. Select the Paint Type button above to get started. Learn more about buying paint at MyPerfectColor.
How do I get the SDS (Safety Data Sheet) for paint matched to RAL RAL6014 Yellow Olive?
The RAL6014 Yellow Olive is the color and the SDS is based on the type of paint used to make the color. You can find Safety Data Sheets here for our most popular products.
Do I need a primer for RAL6014 Yellow Olive?
The need for primer for RAL6014 Yellow Olive depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert RAL6014 Yellow Olive to a different color from another paint company?

While we can provide RAL6014 Yellow Olive in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.