RAL 1012 Lemon Yellow Paint

Order by RAL code when acceptance is "meets the RAL standard" and close visual harmony is sufficient. Send a sample (or OEM powder reference) when any of the following apply:

• Acceptance requires matching an existing coated part or assembly, not just the RAL standard.
• High-visibility cosmetic surfaces or large-area repaints where small deltas will be noticed.
• A known OEM powder specification (brand/product code, gloss, texture) must be matched.
• The existing part is aged, weathered, or has a distinct texture/gloss that must carry through.

Provide a clean, representative physical standard (flat area >=25 mm), the required sheen/texture, substrate, and any inspection criteria. This allows targeting the actual finish rather than the abstract RAL target and reduces acceptance risk.

Field touch-up restores protection and reduces contrast, but it will not replicate a factory powder coat exactly.

• Best use: small chips, scratches, fastener heads. For large, uniform areas, consider a sample-based or OEM match and broader repaint.
• Expect some difference due to gloss/texture, application method, aging, and site lighting. Verify appearance under the lighting where the part will be inspected.
• Prep: clean, degloss adjacent area, and prime any bare metal. Apply thin coats and feather edges to minimize witness lines.
• Select sheen to approximate the surrounding area (matte/satin/gloss) to reduce perceived color shift.

Not necessarily. RAL specifies a color target, not the coating process. Powder and liquid coatings can differ in gloss, texture, and angle-dependent appearance, and powder suppliers and batches vary.

• If acceptance is "match the RAL standard": order RAL 1012 and specify desired gloss (matte/satin/gloss).
• If acceptance is "match our part/powder": provide a physical sample or the exact OEM powder code (brand, product, gloss, texture) for a targeted match.
• For cross-material coordination (metal vs plastic) where textures/sheens already differ, a standard RAL match is often sufficient.

Document whether you are matching the RAL standard or the existing part to avoid rework or rejection.

• Touch-up pen: pinpoint nicks and edges <=1 mm; fastest for line-side repairs.
• Brush bottle: chips/scratches roughly 1-10 mm; better control and film build.
• Aerosol/spray: larger areas or blended edges; helps reduce brush marks. Use light passes to limit texture differences.

For all formats: clean the surface, scuff if glossy, prime bare substrates, and confirm under site lighting before release. On textured powder coats, expect texture differences-limit repair size or consider a sample-based match for larger repaints.

Yes, our spray paint, paint pens and touch up bottles are ideal for touching up parts of all kinds, including powder coatings. However, keep in mind that our version of RAL1012 Lemon Yellow is based on the color swatch contained in the official RAL color book. The color and sheen of your specific production parts may be different. If you need a touch up application, we can create a touch up solution precisely matching your specific parts.

Learn more about our color matching service.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to RAL1012 Lemon Yellow enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

While we can provide RAL1012 Lemon Yellow in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.