Match of Alcoa™ Pebblestone Clay *

For direct touch up on factory-finished Alcoa Pebblestone Clay 75118 trim coil, use a MyPerfectColor product that is labeled Original Material Match. In this collection, that is the option suitable for touch up because it includes a sheen match. If you are repairing a scratch, rub mark, cut edge, or shipping blemish on the original surface, choose that format rather than a general color-matched product.

If the repair is on an installed piece that has already aged, the color reference is still useful, but the repair may not disappear completely because sheen, texture, and weathering can affect the result.

Alcoa Pebblestone Clay 75118 gives you the correct color reference for MyPerfectColor matching, but an older installed surface can still look different because of weathering, chalking, sheen change, texture, and batch variation. That means the reference color may be right while the existing piece reads slightly lighter, duller, or otherwise different beside the repair area.

If the area is highly visible, compare against the actual installed part or a removed sample when possible. That is often a safer check than relying on the name alone.

For direct touch up on Alcoa Pebblestone Clay 75118 factory-finished building material, choose Original Material Match because it includes a sheen match. Water-based housepaint and specialty options such as urethane or epoxy can still be color-matched to Pebblestone Clay, but they are better suited to separate parts, accessories, or broader repainting where direct touch-up performance is not the goal.

If you are painting a replacement piece, trim detail, or nearby accessory rather than repairing the original factory-finished surface, the format choice can be different. Match the product to the job, not just to the color name.

Alcoa Pebblestone Clay 75118 is a factory color reference for trim coil metal roofing, gutters, trim, and related metal details. If you are touching up a damaged factory-finished part, use an Original Material Match product so the repair includes a sheen match. If you are painting a separate accessory, flashing, transition piece, or replacement part that needs to blend with nearby material, MyPerfectColor can make a matched paint to the same color reference.

This color reference helps keep nearby metal components coordinated, but the final appearance still depends on the substrate, the finish on the part, and how much the existing material has aged.

Before painting Alcoa Pebblestone Clay 75118, clean the surface well and remove dust, grease, and loose residue. For many metal repairs, a light scuff and the right primer can improve adhesion, but the exact prep depends on the substrate and the existing finish. Metal, vinyl, fiber cement, laminate, and previously coated parts do not all behave the same, so test on the actual material when possible.

If the project is a direct touch up on factory-finished trim coil, make sure the product you choose is Original Material Match. Prep helps the paint bond, but it does not remove differences caused by texture, sheen, or aging.

It depends. MyPerfectColor matches the color of the Alcoa Pebblestone Clay but may not match the sheen. If you see Custom Sheen as a sheen option, this means we also match the sheen of the material, otherwise you would need to pick the closest sheen available. However, keep in mind that our version of the Alcoa Pebblestone Clay is based on matching an official Alcoa color sample. The color and sheen of your specific Alcoa parts may vary. If your material is not new and has been exposed to the weather, then it is likely that the color has changed over time. MyPerfectColor samples not been exposed to sunlight and weather. If you need a touch up application, you may need to send us a part so we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Alcoa Pebblestone Clay enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor Paint matching the Alcoa Pebblestone Clay can be used to paint siding and any other items you'd like to blend into your exterior such as windows, doors, lights, pipes, gutters and vents. Many types of paint are available with no minimum order quantities. MyPerfectColor offers spray paint, paint pens, touch up bottles, water-based acrylics, epoxies, urethanes and a variety of other paints. The best paint for painting siding is exterior house paint (usually low lustre sheen). Spray paint works great for windows, doors, lights, pipes, vents and more.

Paint can be purchased by choosing the paint type above. Contact MyPerfectColor support if you have specific questions about the best paint to use for your project.

MyPerfectColor has the original Alcoa color samples. A sample of the Alcoa Pebblestone Clay you are looking for is in our library. We are able to make paint and verify that it matches the original.

Please note that if your existing materials are not new and you are trying to touch up, they will have aged and are likely different now than they were when new. MyPerfectColor will be sending paint matching the sample at our facility which has not aged the same as your materials and may also be different due to other factors such as variations in manufacturing processes. If your match is critical, you may consider sending a part of your materials for precise color matching. Learn more about our color matching services.