Match of Sherwin Williams™ SW4067 Dewpoint *

Yes, but the surface needs proper prep first. Clean off dirt, grease, and any loose rust or contamination, then scuff glossy or smooth areas so the new coating can bond. If the old finish is peeling, chalking, or otherwise failing, address that before painting.

With SW4067 Dewpoint, the condition of the old coating matters because gloss, texture, and wear can change how the finished item looks. A sound, well-prepared surface gives you a more consistent result than trying to spray over a damaged or uneven coating.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paint formats usually cover about 400 to 600 square feet.

If you are ordering SW4067 Dewpoint for a large or rough surface, estimate conservatively and allow extra material for edges, texture, and a second coat if needed.

Confirm the brand reference, product type, sheen, and quantity before you place the order. MyPerfectColor makes a custom match of Sherwin Williams SW4067 Dewpoint, so it is important to be sure you have the right color reference and the right format for the job.

Custom-made color matches are not returnable or refundable, so checking those details first is the best way to avoid ordering the wrong product.

Choose the sheen based on how the item will be used and how much light reflection you want. The same SW4067 Dewpoint color can look different in matte, satin, or glossier finishes because higher sheen reflects more light and lower sheen reflects less.

If the part needs easier cleaning or more durability, a higher sheen may be a better fit. If you want less reflection on the finished item, a lower sheen may be preferable. When appearance consistency matters, match the sheen to the target surface as closely as possible.

For spray application, dry-to-touch, recoat, and full cure are different stages. Spray paint is typically dry to the touch within minutes, can usually be recoated in one to two hours, and reaches full cure in about two weeks.

Do not assume the part is ready for heavy handling just because the surface feels dry. If you need to install, assemble, or pack the item soon after painting SW4067 Dewpoint, leave enough time for handling and curing.

MyPerfectColor has an original sample of the Sherwin Williams SW4067 Dewpoint in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW4067 Dewpoint. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW4067 Dewpoint, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.