Match of Sherwin Williams™ SW4044 Quartzite *

A match of Sherwin Williams SW4044 Quartzite is the Sherwin Williams color reference, not the original Sherwin Williams paint product. MyPerfectColor uses that reference to make its own custom-matched paint to the selected brand color.

The code alone does not define sheen, product line, surface prep, or how an existing painted surface will look. If you need the right match, confirm SW4044 Quartzite from a physical swatch or a known existing color reference before you order.

Coverage for SW4044 Quartzite depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, while other paint formats typically cover between 400 and 600 square feet.

If you are coating trim pieces, hardware, vents, grille covers, PVC pipe, or other small parts, plan for extra material if the surface is rough, porous, dark, or uneven. Those conditions can require more than one coat to get even coverage.

For SW4044 Quartzite spray paint, dry to touch is usually within minutes, but recoat timing is different. You should normally wait one to two hours before recoating.

Full handling strength takes longer, with full cure in about two weeks. If the part has to be assembled, installed, or put into service, do not treat dry to touch as fully cured.

Yes, MyPerfectColor spray paint matched to SW4044 Quartzite can be used on many plastic parts, but plastics vary a lot. Testing on the actual material is important because some plastics need different prep or primer than others.

MyPerfectColor spray paint sticks well to most plastics, and using the MyPerfectColor primer can improve adhesion. This is especially important for low-energy plastics or parts that will be handled often, such as covers, grilles, fixtures, or removable accessories.

Confirm SW4044 Quartzite from a physical swatch from the original Sherwin Williams color or from a known existing reference, not from a screen alone. MyPerfectColor matches the original brand color standard, so the target color should be verified before you place the order.

This matters most if you are matching a part, fixture, pipe, vent, or accessory to an existing painted surface. The same color can read differently across lighting, sheen, texture, and substrate, so the reference you approve should be the real one you want matched.

MyPerfectColor has an original sample of the Sherwin Williams SW4044 Quartzite in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW4044 Quartzite. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW4044 Quartzite, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.