Match of Sherwin Williams™ SW4033 Brass *

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. For spray paint, a typical can covers about 20 square feet with one coat. If you are coating a large area, a rough surface, or a color change over a darker substrate, plan for extra material so you do not run short.

For other MyPerfectColor paint formats, coverage is commonly about 400 to 600 square feet, but the exact amount still depends on the product and the job. If your project is a small part, fixture, or removable item, spray paint matched to SW4033 Brass is usually the most practical starting point.

Yes, but plastics vary widely, so test on the actual material before coating the full part. MyPerfectColor spray paint sticks well to most plastics, but some low-energy surfaces need better prep or a primer to improve adhesion.

If the item is a vent, cover, trim piece, or other plastic component, clean it well and test a small area first. For better adhesion on difficult plastics, use the MyPerfectColor primer for Acrylic Enamel before applying the SW4033 Brass match.

Yes. Finish affects reflectivity, and that changes how the matched color reads after it is applied. The same SW4033 Brass match can look different in a flatter finish versus a glossier one because the surface reflects light differently.

When ordering, choose the finish that fits the part and the expected wear, then keep in mind that the sheen is part of the final appearance. Finish is a practical coating choice, not just a visual preference.

Confirm SW4033 Brass from a physical swatch from the original brand or from a known existing color reference before ordering. Screen colors can shift with calibration, lighting, and display settings, so they are not reliable enough for final approval.

MyPerfectColor makes a custom match to the selected SW4033 Brass reference. It is not the original Sherwin Williams paint product, so verify that SW4033 Brass is the exact target color before you place the order.

The Safety Data Sheet is tied to the MyPerfectColor paint product, not to the SW4033 Brass color name by itself. To get the correct SDS, look up the exact MyPerfectColor product you plan to order.

If you need compliance information before purchasing, check the MyPerfectColor Safety Data Sheets page for the specific coating format and chemistry. That is the safest way to confirm the current SDS for the SW4033 Brass match.

MyPerfectColor has an original sample of the Sherwin Williams SW4033 Brass in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW4033 Brass. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW4033 Brass, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.