Match of Sherwin Williams™ SW4019 Flint Gray *

Choose the finish based on how the item will be used, not just on the color SW4019 Flint Gray. Lower sheen finishes usually reflect less light and can hide small surface flaws better, while higher sheen finishes are typically easier to clean and may look more reflective on the finished part.

Because gloss level changes how a matched color reads, SW4019 Flint Gray can look slightly different in matte, satin, semi gloss, or gloss. If the item will be handled often or cleaned often, pick the finish that fits that use case before you order.

Yes, SW4019 Flint Gray can be ordered as MyPerfectColor spray paint for many plastic projects, but plastics vary a lot. Test on the actual part first if possible, because some plastics accept coating better than others.

For better adhesion, clean the surface well and use the MyPerfectColor primer when appropriate. The primer is especially helpful on difficult or low-energy plastics, and a test application is the safest way to confirm the result before coating the full item.

A match of Sherwin Williams SW4019 Flint Gray is a practical choice for MyPerfectColor custom spray paint when you need to coat small or awkward items like trim details, fixtures, railings, vents, pipes, hardware, and accessories. It is especially useful when brushing would be inefficient or when you need an even spray finish on removable parts.

This is a MyPerfectColor match to the selected Sherwin Williams color reference, so it is meant for color coordination on the actual object you are coating. It is a good option for metal, plastic, wood, or previously coated parts when the surface is properly prepared.

Even when SW4019 Flint Gray is matched correctly, the finished look can change with lighting, placement, surface texture, and nearby materials. A color that was approved from a swatch or sample can read a little differently once it is sprayed onto a real part.

This matters most when the painted item sits next to an existing surface, because aging, sheen, and texture differences can become visible. If you are coating a part that will be seen beside an older painted area, expect some variation in appearance even with a correct MyPerfectColor match.

MyPerfectColor spray paint matched to SW4019 Flint Gray is typically dry to the touch within minutes, but dry to the touch is not the same as fully cured. Plan on a recoat window of about 1 to 2 hours unless the product directions for your order say otherwise.

For handling, stacking, or putting the part back into service, allow about two weeks for full cure. If the item will be installed soon after painting, keep handling to a minimum until the coating has had time to harden.

MyPerfectColor has an original sample of the Sherwin Williams SW4019 Flint Gray in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW4019 Flint Gray. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW4019 Flint Gray, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.