Match of Sherwin Williams™ SW2051 Beach House *

Confirm SW2051 Beach House from a physical swatch or a known existing reference from Sherwin Williams, not from a screen image alone. Screen viewing can shift the color enough to cause an ordering mistake.

MyPerfectColor makes a custom match to the selected brand color reference, so the safest order is based on the actual SW2051 Beach House target you want matched.

Not always. Lighting, sheen, placement, and nearby surfaces can change how SW2051 Beach House reads on the finished item, even when the match itself is correct.

If the part will sit next to an existing painted surface, the final appearance can be more sensitive to those variables. For the lowest risk, evaluate the color in the same lighting and on the same substrate that will be used in the project.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats are needed. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover between 400 and 600 square feet.

If you are painting rough, porous, or dark surfaces, plan for extra material because those conditions often use more paint. For small parts like trim pieces, fixtures, PVC pipe, vents, or hardware, it is usually better to estimate conservatively and round up.

Yes, but plastics vary a lot, so test on the actual part first. MyPerfectColor spray paint sticks well to most plastics, but low-energy or hard-to-bond plastics may need extra prep and a primer to improve adhesion.

Clean the surface, use the right primer when needed, and make a test application before coating the final item. That is especially important on items like covers, housings, grilles, and other molded parts.

Apply SW2051 Beach House in light, even coats and keep a consistent spray distance. Overlap passes slightly and avoid heavy passes, since too much wet paint can cause runs, uneven sheen, or a muddy color build.

For small parts, brackets, mailboxes, shutters, or similar items, several light coats usually give better control than one heavy coat. Let each coat flash and dry according to the product instructions before adding the next coat.

MyPerfectColor has an original sample of the Sherwin Williams SW2051 Beach House in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2051 Beach House. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2051 Beach House, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.