Match of Behr™ 660E-3 Foxgloves *

Primer for Behr 660E-3 Foxgloves depends on the surface and its condition. A primer can improve adhesion and help with hiding, but it is not always required. Follow the prep guidance for the specific MyPerfectColor product you order, especially if the surface is bare, glossy, stained, patched, or otherwise hard to coat. For difficult substrates or worn existing finishes, using a primer is usually the safer choice.

Coverage for MyPerfectColor matched to Behr 660E-3 Foxgloves depends on the size of the item, surface texture, hiding power, application method, and the number of coats required. For custom spray paint, a practical planning estimate is about 20 square feet per can per coat. For non-spray paint formats, coverage is often about 400 to 600 square feet per coat, but the actual yield can vary. If the surface is rough, porous, or a darker color is showing through, order extra so you do not run short.

Choose the finish for Behr 660E-3 Foxgloves based on how the item will be used, how easy it needs to be to clean, and how much light reflection you want. Higher-gloss finishes are usually easier to wipe down and can be more durable on handled parts, while flatter finishes reduce reflection. Keep in mind that gloss level changes how the matched color reads on the finished item, so the same Behr 660E-3 Foxgloves match can look different across spray paint and other product formats.

Before ordering a MyPerfectColor match of Behr 660E-3 Foxgloves, confirm the target from a physical swatch or another known brand reference, not from a screen alone. MyPerfectColor is matching the Behr color standard, not the original Behr paint product, so the best order starts with the exact reference you want reproduced. If you are matching an existing painted surface, remember that age, sheen, and fading can make it look different from the original color standard.

Yes. A match of Behr 660E-3 Foxgloves can be ordered as MyPerfectColor custom spray paint for small parts such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar items. Spray paint is a practical choice when you want a smooth finish on removable or hard-to-brush parts. For the best result, clean and prep the item carefully, and follow the selected product's application instructions for the surface you are coating.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 660E-3 Foxgloves enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 660E-3 Foxgloves in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 660E-3 Foxgloves in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.