Match of Behr™ 520C-2 Fountain Spout *

Confirm Behr 520C-2 Fountain Spout from a physical swatch, chip, labeled sample, or a known existing painted reference rather than from a screen image. MyPerfectColor makes a match to the selected brand color reference, so the best order starts with the original color target you want reproduced.

If the source is an aged or faded surface, the new match can be different from the weathered part beside it. In that case, decide whether you want a match of the original Behr 520C-2 Fountain Spout reference or a match to the existing aged surface before placing the order.

For Behr 520C-2 Fountain Spout on metal or on top of an existing coating, clean the surface first, remove grease or dirt, and let it dry fully. If the old coating is glossy and still sound, scuff it so the new coating can grip better. Remove rust, loose paint, chalky areas, and any contamination before painting.

Gloss, texture, and the condition of the old coating can affect the final look even when the color match is correct. If you are coating a part that will stay visible next to an older surface, test the prep plan on a small area first or repaint the full part for a more consistent result.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover between 400 and 600 square feet per gallon, but the exact amount still depends on the job.

For Behr 520C-2 Fountain Spout, plan extra material if the surface is rough, porous, dark, or uneven, since those conditions can require additional coats. Measure the item or total area you are painting, then add some margin if the part is detailed or likely to need a second coat for even coverage.

Choose the sheen for Behr 520C-2 Fountain Spout based on how the item will be used and how you want the finished surface to perform. Lower sheen finishes reduce reflectivity and can be more forgiving on minor surface irregularities. Higher sheen finishes reflect more light and can be easier to clean, but they also tend to show surface texture and application marks more clearly.

Sheen also changes how the matched color reads on the finished item, so the same Behr 520C-2 Fountain Spout match can look different in flat, satin, or gloss finishes. If you are matching an existing painted part, try to match the surrounding sheen as closely as possible, not just the color name.

Behr 520C-2 Fountain Spout custom spray paint is useful for trim details, fixtures, railings, vents, pipes, hardware, access panels, and other small or awkward parts that are easier to spray than brush. It is also a practical choice for removable pieces, accessories, and parts that need a repeatable color match in a MyPerfectColor paint matched to the selected brand color reference.

Spray application is especially helpful when the object has curves, openings, edges, or tight spaces where brushing is inefficient. For the best result, make sure the surface is properly cleaned and prepped, then apply light, even coats so the matched Behr 520C-2 Fountain Spout color builds uniformly.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 520C-2 Fountain Spout enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 520C-2 Fountain Spout in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 520C-2 Fountain Spout in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.