Match of Behr™ 460B-7 Pine Grove *

For MyPerfectColor paint matched to 460B-7 Pine Grove, apply light, even coats rather than one heavy pass. Hold the can at a steady distance, keep it moving, and overlap each pass slightly so the color builds evenly without runs or glossy wet patches.

If the part has edges, corners, or textured areas, expect to use more than one coat. Heavy application can cause uneven sheen, longer dry time, and a darker or muddier look while the film is still wet. Follow the product directions for recoat timing before adding the next coat.

The Safety Data Sheet is tied to the MyPerfectColor product and chemistry, not to the 460B-7 Pine Grove color name alone. If you need the SDS before ordering or using the paint, check the MyPerfectColor Safety Data Sheets page for the product.

For the page referenced in this collection, use https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm. If you are unsure which format you are buying, confirm the exact MyPerfectColor product first so you review the correct SDS.

No. The same matched color can read differently in matte, satin, or gloss because the finish changes how light reflects off the surface. MyPerfectColor 460B-7 Pine Grove can still be the same color target, but the finished part may look deeper, brighter, or flatter depending on sheen.

If you need the closest visual result to an existing item, match the finish as closely as possible and test on the same substrate when the project is sensitive to appearance. A finish change is one of the easiest ways for a color match to look different after application.

Primer depends on the surface, its condition, and the paint type you are using with the 460B-7 Pine Grove match. Bare, porous, patched, glossy, or hard-to-stick surfaces are common situations where primer can help the topcoat adhere and look more even.

As a general rule, primer never hurts and can improve adhesion, but it is not always required. Check the prep guidance for the specific MyPerfectColor product you ordered, especially if you are coating metal, plastic, wood, or an already painted item.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats 460B-7 Pine Grove needs to look even. If you are ordering MyPerfectColor custom spray paint, a can typically covers about 20 square feet with one coat.

For other MyPerfectColor paint formats, coverage is often about 400 to 600 square feet per gallon per coat, but the actual amount can change with substrate and prep. For planning, measure the area, assume more than one coat if the surface is dark or uneven, and add extra if the item is textured or highly absorbent.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 460B-7 Pine Grove enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 460B-7 Pine Grove in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 460B-7 Pine Grove in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.