Match of Behr™ 430A-2 Seafoam Spray *

Start by cleaning off dirt, oils, and any residue, then let the part dry completely. If the PVC is smooth or glossy, a light scuff can help the coating grab better, but do not skip testing on the actual pipe first.

Plastics can vary a lot. For better adhesion on difficult plastic surfaces, use the MyPerfectColor primer before applying a match of Behr 430A-2 Seafoam Spray, and mask any areas you do not want coated.

Coverage depends on the size of the item, surface texture, how well the color hides, and how many coats you plan to apply. For spray paint, a typical can covers about 20 square feet with one coat, but real coverage can be lower on rough, porous, or complex surfaces.

If you are coating small parts like vents, hardware, or fixtures, one can may be enough. For larger pieces, rough surfaces, or projects that need multiple coats, order extra so you do not run short before the finish is complete.

Spray paint is usually dry to the touch within minutes, but that is not the same as being ready for full handling. A match of Behr 430A-2 Seafoam Spray should typically be recoated in one to two hours if another coat is needed.

Plan on about two weeks for full cure before subjecting the coated item to heavier handling or wear. Dry time, recoat time, and full cure are different stages, so do not judge the finish only by the first few minutes after spraying.

Yes. Finish changes reflectivity, and that can make the same matched color read differently on the finished item. A match of Behr 430A-2 Seafoam Spray may look slightly different depending on whether the coating is flatter or glossier, as well as the substrate underneath it.

If the piece will sit next to an existing painted surface, use the finish that best fits the project and test on the actual item when possible. The color reference stays the same, but the final look is affected by sheen, texture, and application method.

Yes, but plastics vary widely, so testing on the actual material is important before coating a full part. MyPerfectColor spray paint sticks well to most plastics, but some low-energy or slick plastics need better prep to reduce adhesion risk.

For best results, clean the surface, use the MyPerfectColor primer to improve adhesion, and then apply a match of Behr 430A-2 Seafoam Spray in light coats. That approach is especially useful for vents, switch covers, grilles, and other plastic items that need a coordinated finish.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Behr 430A-2 Seafoam Spray enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

MyPerfectColor has an original sample of the Behr 430A-2 Seafoam Spray in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

While we can provide Behr 430A-2 Seafoam Spray in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.