70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore CC-64 Bonaparte is a deep, warm red-brown with a brick cast and a noticeable brown undertone. It reads low and grounded rather than bright, with enough chroma to stay clearly red while still leaning earthy. In MyPerfectColor custom spray paint matched to the selected Benjamin Moore color reference, the color can appear slightly fuller or slightly browner depending on finish, film build, and the surface underneath.
This color works well on small spray-painted parts where a dark red-brown needs to carry across metal, plastic, or wood. It can be used on mailboxes, shutters, railings, brackets, switch plates, HVAC vents, speaker grilles, picture frames, shelf supports, cabinet hardware, and decorative trim pieces. It also suits utility items such as PVC, downspouts, and access panels when the goal is to coordinate a visible component with a deeper red architectural color.
Because the color is dark and fairly saturated, coverage and surface prep matter. Light or uneven substrates can show through if the film is too thin, and gloss or semi-gloss finishes can make texture, sanding marks, and sheen differences more noticeable. A steady spray build and proper priming help the color read more evenly, especially on previously coated or mixed-material parts.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore CC-64 Bonaparte.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
No. The same CC-64 Bonaparte color match can read differently after application in matte, satin, semi-gloss, or gloss because finish changes how much light is reflected and how deep the color appears.
If you are coating a new part, pick the sheen that best fits the item and the look you need. If you are trying to coordinate with an existing painted surface, the finish matters as much as the color itself, so a different sheen can make the match look off even when the color formula is correct.
Use light, even coats of MyPerfectColor custom spray paint matched to CC-64 Bonaparte and keep the can moving so you do not load too much paint in one area. Overlap each pass slightly, and stop before the surface looks wet or heavy.
Heavy passes can cause runs, uneven sheen, and color build that looks different from the rest of the part. For the best result, let each coat dry according to the product directions before adding the next coat.
It depends on the substrate, the surface condition, and the product format you are using. A primer is not always required, but it can improve adhesion and help the finished CC-64 Bonaparte match apply more reliably.
Primer is especially worth considering on bare, patched, glossy, or otherwise difficult surfaces. If you are unsure, check the prep guidance for the specific MyPerfectColor product you are ordering, because the right primer choice depends on the material and the job.
Yes. A match of Benjamin Moore CC-64 Bonaparte is a practical choice for MyPerfectColor custom spray paint when you want small parts and hardware to coordinate with a known Benjamin Moore color reference.
It is commonly used for items such as switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar removable parts where a smooth spray finish is easier than brushing. For this kind of project, ordering a match of CC-64 Bonaparte in spray form is often the most straightforward option.
Often yes, but plastics vary a lot, so testing on the actual material is important. MyPerfectColor spray paint sticks well to most plastics, but some low-energy or flexible plastics need extra prep or a primer to improve adhesion.
Clean the part well, scuff it if the material allows, and use the MyPerfectColor primer for Acrylic Enamel when the plastic is hard to bond to or the part will be handled a lot. Because the substrate can change the result, a small test on the exact plastic is the safest way to check fit and adhesion before coating the whole item.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore CC-64 Bonaparte enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore CC-64 Bonaparte in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.