Match of Sherwin Williams™ SW2722 Roan *

For SW2722 Roan in MyPerfectColor spray paint, dry-to-touch is usually within minutes, but that is not the same as being ready for another coat or full handling. A recoat window of about 1 to 2 hours is the right expectation for planning the job, and full cure is about two weeks.

If you are coating a part that will be handled, assembled, or installed, plan around the cure time instead of only the dry-to-touch stage.

Before applying SW2722 Roan, clean the surface well and remove any dirt, grease, rust, or other contamination. If the metal is glossy or the existing coating is slick, scuffing helps the new coating grab the surface better.

If you are painting over an old coating, check that the old layer is sound and not peeling or failing. The gloss, texture, and condition of the old surface can affect how SW2722 Roan looks after application, so a test on the actual part is a good way to reduce risk.

The color reference for SW2722 Roan stays the same, but the finished result can still look different in matte, satin, or gloss because sheen changes how light reflects off the surface. That can make the same match read lighter, deeper, or more reflective after it is applied.

If you are matching an existing painted item, try to match the finish as closely as possible. If you are coating a new part, choose the finish that fits the project rather than assuming every sheen will look identical.

Custom-made color matches of SW2722 Roan should be chosen carefully, because they are not returnable or refundable. Before placing the order, confirm the exact brand color reference, the MyPerfectColor product type, the sheen, and the quantity you need.

This matters most when you are ordering a match of SW2722 Roan for a specific part or project, since the wrong finish or amount can delay the job and the custom order cannot be returned like a standard stocked item.

Yes, but plastics and other difficult substrates vary widely, so testing SW2722 Roan on the actual material is important before you commit to the full project. Some plastics accept coating more easily than others, and surface prep can make a big difference in adhesion.

MyPerfectColor spray paint is designed to stick well to many plastics, and using the MyPerfectColor primer can help improve adhesion on challenging surfaces. Clean the part first, prep it properly, and test a small area if the item is unfamiliar or important.

MyPerfectColor has an original sample of the Sherwin Williams SW2722 Roan in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2722 Roan. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2722 Roan, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.