Match of Sherwin Williams™ SW2015 Faux Marble *

Confirm Sherwin Williams SW2015 Faux Marble from a physical color reference whenever possible, such as an original brand swatch or a known existing painted sample. Screen images can shift with lighting and device settings, so they are not the best basis for ordering a custom match.

MyPerfectColor makes its own paint matched to the selected Sherwin Williams color reference. It is not the original Sherwin Williams paint product, so the most important step is making sure SW2015 Faux Marble is the correct target before you place the order.

Coverage depends on the size of the item, surface texture, hiding power, application method, and how many coats are needed. For spray paint, a typical can covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet, depending on the product and surface.

If you are coating a rough, porous, dark, or uneven surface, plan for extra material because the same SW2015 Faux Marble match may need more coats to look even. When in doubt, measure the area and build in a margin for test pieces and additional coats.

Yes, but prep matters. Clean the surface first, remove dirt, grease, and loose contamination, and scuff glossy areas so the new coating can bond better. If the metal has rust or the old coating is peeling, that damage should be addressed before painting.

The final look of SW2015 Faux Marble can change based on the condition of the old coating, its gloss, and its texture. If the new coating will sit next to an older finish, expect that aging and surface condition can make the result read differently even when the color match is correct.

Use light, even coats rather than trying to cover in one heavy pass. Keep the spray can moving, overlap each pass slightly, and maintain a consistent working distance so the coating lands evenly across the surface.

Heavy passes can cause runs, uneven sheen, or a muddy build of color. Let each coat dry enough before adding the next one, and use multiple thin coats if needed to build an even match of SW2015 Faux Marble on the finished item.

Plastics vary widely, so the safest approach is to test the SW2015 Faux Marble match on the actual material before committing to the full project. MyPerfectColor spray paint sticks well to most plastics, but different formulations and low-energy surfaces can change adhesion.

Using the MyPerfectColor primer for Acrylic Enamel can help improve adhesion on difficult substrates. Clean the surface well, follow the prep needed for the specific plastic, and test first if the part is important or hard to replace.

MyPerfectColor has an original sample of the Sherwin Williams SW2015 Faux Marble in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2015 Faux Marble. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2015 Faux Marble, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.