Match of Sherwin Williams™ SW1049 Belgian Chocolate *

No. The same SW1049 Belgian Chocolate match can read differently in matte, satin, semi-gloss, or gloss because the finish changes how much light reflects off the surface. That can affect perceived depth and how dark or rich the color looks after application.

If the item must look a certain way, choose the finish based on the surface and the result you need, not the color code alone. The code identifies the color target, but it does not define sheen.

Choose the finish based on how the part will be used and how you want the matched color to read on the finished item. Lower-sheen finishes usually reduce reflectivity, while higher-sheen finishes are typically easier to wipe clean and may show the color with more visual depth.

For SW1049 Belgian Chocolate, remember that sheen changes the final appearance even when the color match is correct. If the item is a trim piece, fixture, hardware item, or other small part, the finish choice can be as important as the color match itself.

For MyPerfectColor spray paint matched to SW1049 Belgian Chocolate, dry to touch happens within minutes, recoating should be done in one to two hours, and full cure takes about two weeks.

Those are different milestones. A piece may feel dry quickly but still need more time before heavy handling, assembly, or exposure to wear. Plan the project so each coat has enough time before the next one.

Start by cleaning the surface, removing dust and contaminants, and degreasing if needed. Light scuffing can help where appropriate, especially on smooth or previously coated surfaces. Mask any areas you do not want painted.

Before painting a larger area, test SW1049 Belgian Chocolate on the actual surface. That helps confirm adhesion, appearance, and whether the substrate or old coating changes how the match reads.

Coverage depends on surface size, texture, hiding power, application method, and how many coats are needed. For spray paint, a typical can covers about 20 square feet with one coat.

If you are coating a rough, porous, or dark surface, plan for more material than a smooth, light, or already coordinated surface. For SW1049 Belgian Chocolate, factor in the number of coats needed for even color and complete coverage before you order.

MyPerfectColor has an original sample of the Sherwin Williams SW1049 Belgian Chocolate in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1049 Belgian Chocolate. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1049 Belgian Chocolate, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.